LCD Contrast
You can select the LCD contrast level from 1 to 4 by programming. To make
the display clearer, set to high level. Your phone comes from the factory set
to 3.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to "LCD contrast" by pressing
[ ] or [ ].
3
Press [ ].
• The current setting is displayed.
• "
" shows one level.
4
Select the desired LCD contrast by
pressing [ ] or [ ].
• Each time you press [ ] or [ ], the LCD
contrast will change.
5
Press [ENTER] (Save key).
• A beep sounds.
• To exit the programming mode, press
[EXIT].
• You can exit the programming mode any time by pressing [EXIT].
For assistance, please call: 1-800-211-PANA(7262)
–––––––––––––––
Save M1,M2,M3
Save directory
Save directory
LCD contrast
Ringer setting
Ex. Level 3
LCD contrast
Low
ENTER=Save
High
21