Using On-Screen Menus - Panasonic DVD-LX110 Operating Instructions Manual

Using On-Screen Menus

1 2
DISPLAY
Press once.
Main menus
Program, Group, Title
Chapter, Track, Playlist
Content
To skip incrementally or decrementally (Time Slip for play only) (Except iR/iRW)
1. Press [ENTER] twice to show Time Slip indicator.
2. Press [3 4] to select the time and press [ENTER].
Time
To start from a specific time (Time Search) (Except iR/iRW)
e.g. Playback from 1 hour 46 minutes and 50 seconds (Enter using the remote control) :
[1] ➜ [4] ➜ [6] ➜ [5] ➜ [0] ➜ [ENTER]
To change remaining/elapsed time display
Video To display pixel number
(➜ page 18, Changing soundtracks)
Audio
To display the current bitrate or sampling frequency
Still Picture To switch still picture
Thumbnail To show thumbnail images
Subtitle
(➜ page 19, Changing subtitles)
Marker (VR) To recall a marker recorded on DVD recorders
Angle (➜ page 19, Angle select)
Rotate Picture (➜ page 19, Still picture rotation)
To turn on/off slideshow
Slideshow
To change the slideshow timing ("1 Fast" to "5 Slow")
≥ When using Slideshow, Skip/Rotate picture may not work correctly depending on the play position.
Other Settings (➜ See below)
Other Settings
Play Speed
Play Menu
(Only when the elapsed play time can be displayed,
[JPEG] [SD[PICTURE] : The Repeat and Marker functions can be used.)
Repeat
A-B Repeat
Marker
Except [DVD-VR]
Advanced Disc Review
26
26
1 Press [34] to select the menu.
2 Press [1] to go to the next menu and [34] to set.
Repeat step 2 if necessary.
ENTER
≥ Items shown differ depending on the type of software.
≥ Press [2] to go to the previous menu.
≥ There are items which you can select using the numbered buttons
and [ENTER] on the remote control.
≥ If the setting does not change, press [ENTER].
≥ To exit the screen: Press [RETURN].
To start from a specific item
≥ Press [3 4] to select and press [ENTER].
≥ Press and hold [34] to alter faster.
≥Press and hold [34] to alter faster.
(➜ page 17, Changing play speed)
(➜ page 16, Repeat play)
(➜ page 16)
To mark up to 5 positions to play again
[ENTER] (The unit is now ready to accept markers.)
To mark a position:
To mark another position: [2 1] to select "¢"➜ [ENTER]
To recall a marker:
To erase a marker:
≥ This feature doesn't work during program and random play.
≥ Markers you add clear when you open the disc lid, remove the card,
press [AV SELECT] or switch the unit to standby.
(➜ page 17)
[ENTER] (at the desired point)
[2 1] ➜ [ENTER]
[2 1]➜ [CANCEL] (Remote control)