Panasonic TX-P65VT50Y Operating Instructions Manual page 23

To view the 3D images
You can enjoy the 3D images in a variety of ways.
(Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.)
■
Playing back 3D-compatible Blu-ray disc (Frame Sequential format)
● Connect the 3D-compatible player via a fully wired HDMI compliant cable.
●
If input mode is not switched automatically, select the input mode connected to the player.
●
If you use the non 3D-compatible player, the images will be displayed on 2D mode.
■
3D-supported broadcast
●
Please consult the suppliers of contents or programmes for availability of this service.
■
3D photos and 3D videos taken by 3D-compatible Panasonic products
●
Available in Media Player and Network services
■
2D images converted to 3D
●
Set to [2D 3D] mode in [3D Mode Selection].
Preparations
Perform the First Registration when the 3D Eyewear is used for the first time.
Turn the 3D Eyewear on and put it on
1
●
Connection status and battery status are displayed on the bottom right of the screen.
View the 3D images
2
●
Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view
3D images.
If you select [Yes], this message will be displayed again in the same condition after Mains power On / Off
switch is next turned on. Select [No] if you do not want to display this message again.
●
Turn off the 3D Eyewear after using it.
Changing 2D - 3D mode
You can easily change the viewing mode between 2D and 3D using the 3D button.
Select the mode
3D Mode Selection
2D 3D
3D
2D
[3D] / [2D] / [2D 3D]:
Displays the appropriate image that you desire without selecting 3D format.
●
This mode may not work properly depending on the source image format. In this case, select the appropriate 3D
format manually.
"Registration" (p. 21)
● Items of [3D Mode Selection] vary
select
depending on the condition.
set
23