Technics STG30LE Operating Instructions Manual page 19

Music server
Hide thumbs Also See for STG30LE:
Table of Contents

Advertisement

To a household
mains socket
3
AC mains lead (supplied)
¢ Insert the AC mains lead up to a point just before the round hole.
1 Connect the device with a built-in USB-DAC.
This unit will output audio signals, allowing you
to play back music files.
≥ See the operating instructions for connected
equipment for operational details.
≥ The USB connection is not required for the
playback of music using the DLNA function.
2 Wired LAN connection
Normally, just connecting a LAN cable will
complete the setup.
≥ Use category 7 or above straight LAN cables
(STP) when connecting to peripheral devices.
3 AC mains lead connection
Connect only after all other connections are
completed.
Note
お知らせ
お知らせ
≥ This unit consumes a small amount of AC
power (
mode. Remove the plug from the main electrical
outlet if you will not be using the unit for an
extended period of time. Place the unit so the
plug can be easily removed.
¢
≥ While the AC mains lead is disconnected, the
LAN cable must be connected or disconnected.
≥ Inserting any cable other than a LAN cable in the
LAN port can damage the unit.
27) even when the unit is in standby
Connections
19

Advertisement

Table of Contents
loading

Table of Contents