Table of Contents
Advertisement
4
Turn the storage tray over with the top side facing up, and tighten the screws (supplied).
≥ Use a cross-slot screwdriver to tighten the screws. Choose a cross-slot screwdriver that matches the size of the screws.
≥ Do not tighten the screws with excessive force. Doing so will strip their threads, making it impossible to
use the screws again.
Hold the SSD with one hand to prevent it from falling.
5
Insert the storage tray into this unit, and tighten the fixing screw.
≥ After inserting the storage tray, tighten the fixing screw firmly until the tray is secure.
6
Connect the devices/AC mains lead, etc. (
7
Format the SSD using the "Technics Music App". (
≥ For details, refer to the user guide for "Technics Music App".
∫ When replacing the SSD, be sure to follow the steps above.
≥ Before installing or removing the SSD, be sure to turn off this unit and pull out the mains plug from the
outlet. Not doing so may cause malfunctions.
Note
お知らせ
お知らせ
≥ Be careful not to touch the gold contacts on the SSD.
≥ We recommend creating a backup of your important data to prevent its loss before replacing the SSD. (
Storage tray (Top)
Flip over the
tray.
Check the fixing screw position.
screw (supplied)
SSD
18, 19)
20)
Getting your SSD ready for use
24)
13
Advertisement
Table of Contents
