Outdrive Identification; Intermediate Assembly; Drive Unit; Engine And Propeller Rotation - Yamaha DE-DHT Stern Drive Service Manual

GEN

OUTDRIVE IDENTIFICATION

INFO
1
YAMAHA MOTOR CO.,LTD.
MADE IN JAPAN
PAYS D'ORIGINE JAPON
B C
OUTDRIVE IDENTIFICATION

Intermediate Assembly

The model and serial number plate 1 is lo-
cated on the bottom surface of the interme-
diate housing.
1

Drive Unit

The model and serial number plate 1 is lo-
cated on the upper case of the drive unit.
The different models can be identified by
checking the model and serial number plate
and using the following plate.
A
INT-HDP
INT-HDL
DE-DHT
1 Intermediate Assembly
2 Drive Unit
D
*Code Explanation:
DP–With Power Steering
DL–Without Power Steering, for Twin Installation
D–1.68:1 Gear Ratio
C–1.78:1 Gear Ratio
NOTE:
INT-HDP 6U0 DP *******
INT-HDL 6U0 DL *******

Engine and Propeller Rotation

Engine rotation is determined by looking at
the flywheel end of the engine. The Yamaha
engines covered in this manual rotate coun-
terclockwise to the left as viewed from the
flywheel.
As for the propeller rotation, the front pro-
peller rotates counterclockwise, and the rear
propeller rotates clockwise.
1-1
MODEL PREFIX VARIATION* SERIAL NO.
A B
6U00 DP
6U00 DL
6U41 C
6U51 D
E
C D
1
*******
2
*******