Yamaha TNR-e Quick Manual page 15

Copying from Block to Block
You can copy either a single layer to a different block, or all layers from the current block to another block.
• Copying via the LED Buttons
1.
Select the layer or block you want to copy.
2.
Touch and hold the [R5] function button. The currently playing block will be displayed.
To Copy a Single Layer:
While still holding the [R5] button, tap the lowest LED button in the lit column (the LEDs in the column will shine brighter), and
then tap an LED button in the column corresponding to the block you want to copy to. The current layer from the source block
will be copied to the same layer in the destination block.
To Copy All Layers:
While still holding the [R5] button, tap the lowest LED button in the lit column twice (the LEDs in the column will shine brighter
each time the button is tapped), and then touch an LED button in the column corresponding to the block you want to copy to. All
layers from the source block will be copied to the destination block.
Tap the lowest LED button in the lit column
 Only the selected layer is copied.
Double-tap the lowest LED button in the lit column
 All layers are copied (the entire block).
TNR-e Quick Guide
Holding the [R5] button
Tap an LED
button in the
column
Holding the [R5] button
corresponding
to the block you
want to copy to.
Using Blocks
15