Table of Contents
Advertisement
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
Control pan-
Function
els
Main switch
%
Select the hotplate
§
/
μ
Select power level
/
A
@
Time program
q
Childproof lock
D
Indicators
Power levels
-
‚
Š
Residual heat
•
The hotplates
Hotplate
Single hotplate
$
Use only cookware suitable for induction cooking; see the section on suitable cookware.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Indicators
‹‹
›
Control surfaces
Pressing a symbol activates its corresponding function.
Notes
The settings will not change if several symbols are pressed at
■
the same time. This enables the programming zone to be
cleaned when food is spilt.
Always keep the control surfaces dry. Moisture can affect
■
proper functioning.
Turning on and off
Always use cookware of a suitable size.
Time program function
Powerboost function
9
Advertisement
Table of Contents
