Yamaha YAS-306 Quick Start Manual page 22

3
Teach the unit the TV remote control's "Mute" command.
3-1 Press the key on the unit.
CONNECT
Indicators
3-2 Point the TV's remote control at the remote control sensor on the unit, hold
down the mute key for at least 1 second, and then release it for at least 1
second. Perform this operation twice.
The position of the remote control sensor varies depending upon the installation of
the unit (p.10).
Approx. 30 cm
Hold down
(for at least 1 second) (for at least 1 second)
Bleep/
Result
buzzer
Successfully
Once
learned
Failed to learn
Repeat from Step Twice
3-1.
Troubleshooting the unit's failure to learn commands
✓
Is the TV turned off?
✓
Is direct sunlight or fluorescent light striking the unit and interfering with operation?
✓
Are you using the TV's remote control for Steps 3 though 6? (The unit's remote control is not
used.)
✓
Are you using the remote control within the range indicated above?
✓
Are you holding down keys on the TV's remote control for at least 1 second, and then releasing
them for at least 1 second?
If the unit fails to learn commands even after checking all of the above, hold down and release the
key on the TV's remote control three times.
SETTINGS ➤ Using the TV's remote control to adjust the unit's volume
22
En
TV's remote control
Release Hold down
(for at least 1 second)
Indicators
Glows
Flash
4
Teach the unit the TV remote control's "Volume (–)" command.
4-1 Press the
CONNECT
Indicators
4-2 Point the TV's remote control at the remote control sensor on the unit, hold
down the volume (–) key for at least 1 second, and then release it for at least
1 second. Perform this operation twice.
Result
Successfully
learned
Failed to learn
Repeat from Step
4-1.
5
Teach the unit the TV remote control's "Volume (+)" command.
Release
5-1 Press the
CONNECT
Indicators
5-2 Point the TV's remote control at the remote control sensor on the unit, hold
down the volume (+) key for at least 1 second, and then release it for at least
1 second. Perform this operation twice.
Result
Successfully
learned
Failed to learn
Repeat from Step
5-1.
key on the unit.
Bleep/
Indicators
buzzer
Once
Glows
Twice
Flash
key on the unit.
Bleep/
Indicators
buzzer
Once
Glows
Twice
Flash