Using the alarm function
The unit includes an alarm function (IntelliAlarm) that plays back music sources or beeps (built-in alarm) at the set time in a variety of different methods. Before
using the alarm function, set the time in the clock ( P.7). The alarm function has following features.
3 types of alarms
Use "MusicCast CONTROLLER" to make setting. Select from 3 alarm types, combining music
and beep sounds. Follow the indication of "MusicCast CONTROLLER" to make setting.
The selected audio source is played at the set time. The volume
Source only
fades in gradually and increases to the set volume.
The selected audio source and beep sound are played at the set
time. This mode is recommended for the best possible start to
the day.
Source with beep
3 minutes before the set time: the source music begins to fade
in and the volume gradually increases as the alarm time
approaches.
Alarm time: a beeping sound also begins playing.
If the beep has been turned on ( P.27), only the beep sound
None
will be played.
Source
Network contents and radio can be selected. The following can also be selected depending
on the audio source.
Playback
Source
method
Preset
Network contents
Resume
Preset
FM radio
Resume
Preset
DAB (ISX-18D)
Resume
• Devices connected via Bluetooth cannot be used as music source.
Snooze
The alarm sound stops and resumes after 5 minutes ( P.28).
26
Function
Plays back the specified network content.
Plays back the last network content played
back.
Plays the selected preset radio station.
The radio station you listened to last time is
played back.
Plays the selected preset DAB station.
The DAB station you listened to last time is
played back.