External Devices - Panasonic DMR-ES30V Operating Instructions Manual

External devices

S
= Extra equipment for the connections shown
Amplifier (example)
R
L
AUDIO IN
Red/R White/L
S
Audio cable
Amplifier (example)
S VIDEO
OPTICAL
VIDEO
L
AUDIO
R
S
DVD OUT
Optical digital
audio cable
Push the jack all the
way into the socket
with this side facing
up .
S VIDEO IN
VHS DVD
EXT LINK EXT LINK
/ /
VIDEO IN L/MONO - AUDIO IN - R
AV3
S VIDEO IN S
S VIDEO cable
Panasonic
DMR-ES30V
A
B C
Audio/Video cable
Yellow (Video)
A
B White (L)
C
Red (R)
18
Connecting an analogue amplifier or an analogue system component
In order to enjoy stereo or Dolby Pro Logic, connect the appropriate amplifier
S VIDEO
or an analogue audio component.
VIDEO
Connect the analogue output (L/R) e.g. to a Dolby Pro Logic amplifier.
Y
P
L
As described, connect the Audio cable according to the colours and markings
B
AUDIO
P
R
R
of the connection sockets (white/L, red/R).
DVD OUT
AUDIO OUT (L/R)
Connecting a digital amplifier or a digital system component
Connect an amplifier with a Dolby Digital-, DTS- oder MPEG decoder.
Y
Use an Optical digital audio cable.
P
B
OPTICAL
In the Sound SETUP menu, change the [Digital Audio Output] setting
P
R
according to your connected digital amplifier.
You cannot use DTS Digital Surround decoders that are not suitable for DVD.
Connect an amplifier with built-in Dolby Digital
decoder in order to be able to enjoy Surround
Sound.
Connecting to the AV3 input sockets (e.g. Camcorder)
Before you connect the cable, make sure that the power to both devices is turned off.
After you have connected the cables, switch both devices on.
If the audio output of the other device is mono, connect it to the L/MONO socket.
Both the left and the right channels will be recorded if the connection is made via
the L/MONO socket.
This device can playback stereo
sound in Dolby Digital (2 channels).
62
Connect this unit to a device with
a DTS decoder in order to be able
to play DVDs with this symbol.