Panasonic SC-PT85 Operating Instructions Manual page 14

PLAY SPEED
[DVD-VR] [DVD-V]
To change play speed
– from "k0.6" to "k1.4" (in 0.1-unit steps)
≥ Press [1 PLAY]5 to return to normal play.
≥ After you change the speed
– Dolby Pro Logic II has no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to 48 kHz.
≥ This function may not work depending on the disc's recording.
REPEAT MODE
( 12, Repeat play)
A-B Repeat (To repeat a specified section)
Except [JPEG] [MPEG4] [DivX] [DVD-VR] (Still picture part) [VCD] (SVCD)
Press [OK]9 at the starting and ending points.
≥ Select "OFF" to cancel.
SUBTITLE
[DVD-V] [DivX] (with multiple subtitles) [VCD] (SVCD only)
To select subtitle language
≥ On iR/iRW, a subtitle number may be shown for subtitles that are
not displayed.
[DVD-VR] (with subtitle on/off information)
To select "ON" or "OFF"
≥ This may not work depending on the disc.
[DivX] ( 19, Displaying DivX subtitles text)
ANGLE
[DVD-V] (with multiple angles)
To select a video angle
DATE DISPLAY
JP G
DATE
[JPEG] To select "ON" or "OFF" for picture's date display
ROTATION
[JPEG] To rotate a picture (during pause)
0,------. 90,------.180,------.270
^--------------------------------------------J
Menu 2 (Video)
PICTURE MODE
NORMAL
CINEMA1: Mellows images and enhances detail in dark scenes.
CINEMA2: Sharpens images and enhances detail in dark scenes.
DYNAMIC: Enhances the contrast for powerful images.
ANIMATION: Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD]), k2, k4
≥ [JPEG]: during pause
14
14
TRANSFER MODE
If you have chosen "480p"/"576p"/"720p"/"1080p" (progressive), "1080i"
(interlaced) ("VIDEO FORMAT" in Menu 4 (HDMI)), select the method of
conversion for progressive output to suit the type of material.
≥ The setting will return to "AUTO" or "AUTO1" when the disc tray is
opened, the unit is turned off or another source is selected.
When playing PAL discs
AUTO: Automatically detects the film and video content, and
appropriately converts it.
VIDEO: Select when using "AUTO", and the content is distorted.
Select this if the edges of the film
FILM:
content appear jagged or rough when
"AUTO" is selected.
However, if the video content is
distorted as shown in the illustration
to the right, then select "AUTO".
When playing NTSC discs
AUTO1: Automatically detects the film and video content, and
appropriately converts it.
AUTO2: In addition to "AUTO1", automatically detects film
contents with different frame rates and appropriately
converts it.
VIDEO: Select if the video content is distorted when using
"AUTO1" or "AUTO2".
SOURCE SELECT [DivX]
When you select "AUTO" the constructing method of the DivX contents
is automatically distinguished and output. If the picture is distorted,
select "INTERLACE" or "PROGRESSIVE" depending on which
constructing method was used when the contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
Menu 3 (Audio)
DIALOGUE ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the dialogue
recorded in the center channel)
[DivX] (Dolby Digital, 3-channel or higher, with the dialogue recorded in
the center channel)
OFF, ON
Menu 4 (HDMI)
HDMI STATUS
HDMI
To show HDMI information
e.g.
HDMI --- INFORMATION

CONNECTED STATE

AUDIO STREAM

MAX CHANNEL

VIDEO FORMAT

COLOUR SPACE
1 Connection status
2 Shows the output signal type.
(When "OFF" is selected in "AUDIO OUT" (
"– – –" will be displayed.)
3 Shows the number of audio channels.
4 ( 15, VIDEO FORMAT)
5 ( 15, COLOUR SPACE)
HD ENHANCER
This works when the HDMI connection is being used with "VIDEO
PRIORITY" ( 18, HDMI menu) set to "ON".
To sharpen the "720p", "1080i" and "1080p" picture quality
OFF, 1 (weakest) to 3 (strongest)
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
18, HDMI menu),