Panasonic EY74A2 Operating Instructions Manual page 13

Indicator
3 lamps
illuminated
2 lamps
illuminated
One lamp
illuminated
3 lamps
flashing
Battery level indication is just guide.
The indication may change due to the
condition of battery or ambient tempera-
ture.
Excessive (complete) discharging of
lithium ion batteries shortens their service
life dramatically. The driver includes a
battery protection feature designed to
prevent excessive discharging of the
battery pack.
EY74A2_EU.indb 13
Bit-locking Function
Battery status
1. With the trigger switch not engaged and
Charged
enough
Approx. 60%
2. This feature is handy for tightening
remaining
Battery level is
low.
Need to be
charged soon
Empty
Need to be
charged imme-
diately
Changing the Belt Hook Location Side
[Fig.8]
The belt hook can be attached to either
side of the unit.
1. Removing the hook
2. Attaching the hook to the other side
- 13 -
a screwdriver bit locked in place, the
tool can be used as a manual screw-
driver (up to 22.6 N•m, 230 kgf•cm, 199
in•lbs).
There will be a little play in the chuck,
but this is not a malfunction.
screws that require more torque than
the maximum torque of the driver
(position on the clutch), for confirm-
ing the tightness of a screw or to loosen
an extremely tight screw.
(1) Remove the nut.
(2) Draw out the hook.
(1) Insert the hook in the other side.
(2) Tighten the nut fully so that it
securely fastened.
EN
2015/07/16 11:32:15