Advertisement
4.3 Connecting to a set-top box (optional)
Connect one end of the HDMI cable to your MediaQ's HDMI in
port and the other end to the set-top box (STB)'s HDMI out port.
Before connecting, remove
the protective cover.
You can also connect your MediaQ to other HDMI
source devices, such as Blue-ray players.
In standby mode, your MediaQ automatically uses the STB
as the input source. Alternatively, after you complete the initial
setup of your MediaQ, use the remote control to switch to STB
input mode. You can then watch TV via the STB.
If you want to switch back to content saved in your MediaQ or
any storage devices connected to it, use the remote control
device to perform any operation on your MediaQ.
HDMI in
STB
9
Advertisement
