Related Manuals for Huawei DS363
Summary of Contents for Huawei DS363
- Page 1 DS363 Satellite Digital TV Set-Top Box User Guide (Version 01) HUAWEI TECHNOLOGIES CO., LTD.
-
Page 2: Table Of Contents
Contents 1 Warnings and Precautions ............... 1 2 Packing List ....................4 3 Panels ......................5 3.1 Front Panel ......................5 3.2 Rear Panel ......................6 4 Remote Control ..................7 4.1 Appearance......................7 4.2 Keys and Functions .................... 8 4.3 Learning function.................... - Page 3 8 Basic Operations ..................24 8.1 EPG........................24 8.2 Viewing the Program Information Banner............24 8.3 Displaying the program list ................25 8.4 Recording and playback ................... 25 9 Troubleshooting ..................28 10 Specifications ..................30...
-
Page 4: Warnings And Precautions
1 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories. Basic Requirements During storage, transportation, and operation of the device, keep it dry and ... - Page 5 Areas with Inflammables and Explosives Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in the same box as inflammable liquids, gases, ...
- Page 6 Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning agent or spray to clean the device shell. Environmental Protection Do not dispose of the device and the accessories in a garbage can. ...
-
Page 7: Packing List
2 Packing List The following table lists the accessories in the product package. Item Quantity Set-Top Box Remote control AA batteries Power adapter AV cable User Guide If you find any item missing or damaged, contact your service provider. -
Page 8: Panels
3 Panels The figures of the set-top box (STB) shown in the following sections are only for your reference. The actual appearance may differ slightly from that shown depending on the product you purchased. 3.1 Front Panel Item Description USB interface Connect a USB storage device. -
Page 9: Rear Panel
3.2 Rear Panel L N B IN 3 0 0 m A M a x Item Description Connect a satellite antenna cable to the STB to receive LNB In interface satellite signals. Connect the coaxial cable to the STB to send analog video CH3/CH4 interface signals to your TV. -
Page 10: Remote Control
4 Remote Control 4.1 Appearance Upgrading the STB may lead to some changes in the functions of remote control keys. For specific functions, see the instructions provided on the user interface (UI). When using the STB, do not expose the STB's infrared signal ... -
Page 11: Keys And Functions
4.2 Keys and Functions Item Description The red Flash red when you press the keys in the TV learning. indicator Learning keys Learn some key features of the TV remote control. For more information about the color keys, see the Function keys instructions provided on the user interface. -
Page 12: Learning Function
Item Description AUDIO key Switch the audio feed for the channel (when available). MUTE key Mute or unmute the STB. STANDBY Switch the STB between active and standby modes. The green Flash when you press the remote control keys (but the indicator learning keys). -
Page 13: Connecting Cables
learn all the keys, press the STUDY key to save the present setting and exit the learning mode. 5 Connecting Cables Before connecting or disconnecting a cable, power off the STB, TV and all the devices connected to them. Before connecting, check that all the necessary cables are available. -
Page 14: Using The Coaxial Cable
Step 3 Connect the video and audio cable's yellow, white, and red connectors at the other end to your TV's corresponding video and audio interfaces. Step 4 Use the power adapter to connect the STB's DC IN interface to a working power socket, extension cord or surge protector. -
Page 15: Using The Hdmi Cable
5.3 Using the HDMI Cable Antena A B L E I L N B I N 3 0 0 m A M a x Step 1 Use a satellite antenna cable to connect a dish to the STB's LNB in interface. -
Page 16: Inserting The Smart Card
6 Inserting the Smart Card To prevent damage to the STB or the smart card： Do not insert or remove the smart card when STB is powered on. Do not frequently insert or remove the smart card. L N B I N 3 0 0 m A M a x Step 1 Record the serial number that appears in the back of your smart card. -
Page 17: Main Menu Overview
7 Main Menu Overview 7.1 Accessing the Main Menu Press MENU to access the main menu, which includes the following sub-menus: Channel Management: manage the programs. Record Management: manage the record. System Installation:search programs. System Setup:set up the system ... - Page 18 Press OK to management the Record. 7.3.1 Record When you select the Record, it will display the information of record list. Press OK to enter the selected file. Press MENU to return to the last viewed guide. 7.3.2 Scheduled When you select the Scheduled, you can easily set the recording reservations for future programs.
- Page 19 Press OK to edit the parameters. Press MENU to return to the last viewed guide. Timeshift Size: set the time segment of the pause live TV (PLTV). Instant Skip Size: set the time segment of the step. ...
-
Page 20: System Installation
Press OK to format a USB storage device. Press MENU to return to the last viewed guide. 7.3.6 Remove Disk When you select Remove Disk, you can remove the USB storage device safely. Press OK to remove the USB storage device safely. ... -
Page 21: System Setup
When the frequency of signal sound becomes faster and the parameter value of quality and strength are more than 65%, then press OK to start search the programs. Press MENU to return to the last viewed guide. 7.5 System Setup 1. -
Page 22: Factory Reset
7.5.3 OSD When you select the OSD, you can change the information of the transparency and language. Press OK to edit the parameters the first，press OK to save the parameters again. Press MENU to return to the last viewed guide. ... -
Page 23: Ca Menu
7.5.6 USB Upgrade If you want to upgrade the software for STB through USB disk, you can select the USB Upgrade. Press MENU to return to the last viewed guide. Users or maintenance staffs who obtain the USB disk upgrade file ... - Page 24 7.6.2 Card Status When you select the Card Status, you can watch the information of the Smart card. Press OK to show more details of the Smart card. Press MENU to return to the last viewed guide. 7.6.3 Password Mgmt. When you select the Password Mgmt., you can change the passwords.
-
Page 25: Information
7.6.5 Pairing When you select the Pairing, you can view the pairing information between the smart card and STB. Press OK to start pairing. Press MENU to return to the last viewed guide. 7.7 Information 1. Select the Information. 2. - Page 26 7.7.2 Reminder When you select the Reminder, you can view the TV programs that you have reserved. Press MENU to return to the last viewed guide.
-
Page 27: Basic Operations
8 Basic Operations 8.1 EPG 8.1.1 Program Guide Press EPG to display the program guide that provided scheduling information for upcoming programs in a week on full screen with no banner. Press Function key (red) to view programs in previous day. ... -
Page 28: Displaying The Program List
For more information of the currently program please press INFO twice. 8.3 Displaying the program list Press OK to display the program list on full screen. If you set favorite programs, press to switch to the list of favorite programs. 8.4 Recording and playback 8.4.1 Recording the program Please use only the USB storage device which was formatted with... -
Page 29: Time Shift
Press REC to instantly record the current program. Press OK to save the edited parameter, then starts recording the program. Press MENU to exit the setting interface, then you can watch TV. Please prepare a dedicated USB storage device to store recorded ... - Page 30 Press to freeze live TV. Then press to continue watching TV again. Play time Present time of time shift Total time of time shift The STB may require a longer time to read large amounts of data stored in a USB storage device. If the USB storage device does not work properly, you can remove it ...
-
Page 31: Troubleshooting
9 Troubleshooting The following table lists the common STB problems and their possible causes and solutions. Problem Possible Cause Solution The standby The power adapter is Correctly connect the power indicator on the not correctly connected. adapter to the STB, and then front panel does not plug the power adapter into a turn on. - Page 32 Problem Possible Cause Solution Teleview Rating is smart card is set too Rating. not enough low. Pop-up Tip: STB is The time is not on the Please change the working not in working working hours of smart hours of the smart card. hours card.
-
Page 33: Specifications
10 Specifications The product specifications are subject to changes without notification. Tuner and Demodulator Parameter Specifications Input Frequency Range 950 MHz to 2150 MHz RF Input Signal Level -25 dBm to -65 dBm RF Impedance 75Ω LNB Power 13/18 V DC, Max 350 mA LNB Tone Switch 22 kHz +/-2kHz, 0.6 Vpp +/-0.2 V Demodulation... - Page 34 Port Specifications Video RCA (CVBS) Audio RCA (Audio L,R) Environmental Parameter Specifications Input Voltage DC- IN 12V (Power Adapter) Power Consumption < 24W Dimension (L × W × H) About 248 mm × 132 mm × 45 mm Weight About 0.572 kg Working Temperature 0°C to 45°C Working Humidity...
- Page 35 Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
- Page 36 If you would like a copy of the GPL source code contained in this product shipped on a CD, for a charge no more than the cost of preparing and mailing a CD to you, please contact mobile @huawei.com Privacy Policy Please refer to our privacy policy on our websites for the information about how we protect your personal information.
- Page 37 HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com...