Check
Marked Copies
Is the copier Platen Glass or Platen Sheet
dirty?
Are there any streaks on the copy image?
■ If the measures outlined above do not solve the problem, call the authorized Panasonic dealer.
Displaying Status
Normally, "Status" is displayed in grey on each function screen.
However, "Status" is displayed in yellow if the paper tray is empty or toner becomes low.
Select "Status" that is displayed in yellow to confirm the status details.
1. Select "Status" in yellow.
(Ex: Copy function screen)
Machine Care
White Reference Sheet
Scanning Glass (Small)
2. Check the status, and then select "Close".
(Ex: Paper Empty)
White Reference Sheet, Platen Sheet,
Scanning Glass (Small) or Platen Glass (Large)
Wipe off any marks or dirt with a cloth and a neutral
detergent.
Platen Sheet
Wipe again with a dry cloth.
Platen Glass (Large)
Action
Clean the Platen Glass or Sheet.
(See below "Machine Care")
(1) Clean the LSU Aperture Glass. (See page 71)
(2) Clean the White Reference Sheet and the
Scanning Glass (Small). (Refer to "Machine
Care" below)
Select "Paper Empty".
Select "Close".
Check the empty
paper tray, and
then select
"Close"
61