Conference; Setting The Call Waiting Tone - Panasonic KX-TCD952EB Operating Instructions Manual

Paging/Intercom

Conference

During a call using the handset, you can make an intercom call to another handset and then combine
the calls together to establish a conference call between handsets registered to the same base unit.
1
Handset 1:
During a call, press
the desired handset number.
The call is put on hold.
If there is no answer, press
return to the call.
2
Handset 2:
When the unit rings, press
answer.

Setting the Call Waiting Tone

If an incoming call has been received during an intercom between handsets, a call waiting tone
sounds. You can choose whether or not this tone will sound. The factory preset is ON.
1
Press
PROG
Press G or F until " F24 " is displayed.
2
3
Press
OK
The current setting is displayed.
1: ON 0: OFF
Ex. ON
F24U
Press G or F to select the desired
4
setting.
You can press
or ON.
42
. Then enter
I N T
I N T
.
.
i
0 or 1 to select OFF
3
Handset 1:
Press
4
Handset 1 or 2:
Press
to
call.
to
5
Press
A confirmation tone sounds and the
display will return to the stand-by mode.
3
to establish a conference call.
to hang up the conference
.
PROG