Panasonic SC-HC40 Operating Instructions Manual page 13

External unit
Input level
You can select the sound input level of the Bluetooth device.
 Press [PLAY MODE] repeatedly to select "LEVEL 0", "LEVEL +1"
or "LEVEL +2".
• Select "LEVEL 0" if the sound is distorted.
Display function
Press [DISPLAY, –DIMMER] repeatedly to view the information of
the current connected device.
BLUETOOTH Connected
device name
Hands-Free Profile (HFP)
This unit works as a Bluetooth hands-free for your mobile phones.
You can answer or cancel an incoming call with the remote control.
To answer a call Press [
("IN CALL" blinks) display (Talk into the unit's microphone).
Press [
mobile phones ("TRANSFER" blinks. You may
now converse using the mobile phone).
To cancel a call
Press [g,
Press [+, VOL
To adjust volume
"TEL VOL 1" to "TEL VOL 10").
To mute the Press [MUTE]. Press again to cancel.
microphone (During "MIC MUTE", the caller is not able to
hear your voice).
• This unit does not work with Headset Profile (HSP).
• When the mobile phone is too close to the microphone of this unit,
noise may occur. Always keep the mobile phone away from the
microphone of this unit when making a call.
OPERATING AT 2400 MHz TO 2483.5 MHz
Declaration of Conformity (DoC)
Hereby, "Panasonic Corporation", declares that this product is in
compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE
products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative: Panasonic Marketing Europe
GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg,
Germany
This product is intended to be used in the following countries.
PL, CZ, HU, SK, BG, EE, LV, RO, SI, BO, HR, MK, RS, LT, RU, UA, KZ,
BY, O.CIS
This product is intended for general consumer. (Category 3)
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Panasonic Corporation is
under license. Other trademarks and trade names are those of their
respective owners.
(continued)
Connected profiles
]. "CALLING" starts blinking on the
] again to transfer the call to the
].
, –] (Adjustable from
Disconnecting a Bluetooth device
 Press [ MENU] to display "DISCONNECT?" and then press [OK].
A confirmation message is displayed.
 Press [e,r] to select "YES" or "NO" and then press [OK].
• The connection can also be stopped when you disable Bluetooth
transmission on the connected Bluetooth device.
Advanced functions
g To register more devices
 Press [ MENU].
 Press [e,r] to select "NEW DEV" and then press [OK].
The unit enters pairing mode and "PAIRING" starts blinking on the
display.
 While this unit is in pairing mode, access the Bluetooth menu of
the Bluetooth device and execute a Bluetooth search to find this
unit (SC-HC40).
• If prompted for the passkey, enter "0000".
g To select communication quality
 Press [ MENU].
 Press [e,r] to select "LINK MODE" and then press [OK].
 Press [e,r] to select the following modes and then press [OK].
• "MODE 1": Connection with emphasis on communication stability
• "MODE 2": Connection with high bit rate for good audio quality
(Communication might easily be disconnected in this
mode, select "MODE 1" if this occurs).
g To select Auto Link mode
 Press [ MENU].
 Press [e,r] to select "AUTO LINK" and then press [OK].
 Press [e,r] to select the following modes and then press [OK].
• "ON": Automatically linked even in other than Bluetooth selector
• "OFF": Linked only in Bluetooth selector
• These functions are unavailable if a device is connected. Disconnect
the Bluetooth devices to display these functions.
• When "LINKING" is displayed, pressing [ MENU] is invalid.
• Auto Link works only if your device support A2DP.
"Made for iPod" means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by the
developer to meet Apple performance standards.
"Works with iPhone" means that an electronic accessory has been
designed to connect specifically to iPhone and has been certified by
the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries. iPhone is a trademark of Apple Inc.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer
IIS and Thomson.
13
13