Parts For Assembly; Attaching The Pedestal To The Television - Panasonic TY-ST65PV500 Installation Instructions Manual

Parts for assembly

Screws (6)
M8 × 20 (with washer)
Clampers (2)
Assembling the pedestal
1
Place the base so that it is fl at.
To prevent damage to the base, place it on a fl at fl oor
or on a stand.
2
Attach and secure the stand pins.
(1) Insert the two stand pins
base .
• The stand pins
(2) Firmly secure the bolts

Attaching the pedestal to the television

1
Attach the plasma television to the
pedestal.
Arrow marks are displayed on the back cover at the
locations shown below.
Align the stand pins
the plasma television.
(Be sure to check the parts before assembling)
Bolts
M8 × 60 (with washer)
Stand pins
(Attach the speaker after installing the television on the fl oor-mounted stand)
into the top of the
have a front and back.
into the base rear.
with these arrows, and install
(2) Stand poles
(2)
Front
F
2
Attach the stand poles.
(1) Insert the two stand poles
from the rear of the plasma television, and
then use the screws
.
(2) Use the four screws
and plasma television.
A
(2) Base
D
B
D
B
into the stand base
to secure the stand poles
to secure the stand poles
E
A
A
(1)
3