Using Media Player - Panasonic TX-50DSF637 Operating Instructions Manual

Timer Programming
Function No. Channel Name
7 BBC7
Reminder
<TIMER>
USB HDD Rec.
1 BBC ONE
Red Cap
USB HDD Rec.
3 ITV1
<TIMER>
Function [USB HDD Rec.] / [Reminder]
TV mode
[ ]: DVB-S
[ ]: DVB-C
[ ]: DVB-T
[ ]: DVB-via-IP
●
You cannot change the mode within the
menu.
Channel position, channel name, etc.
Displays subtitles (if available)
●
To set subtitles for [Reminder]
(yellow)
Date
Start time / End time / Duration (automatic
display)
: Overlapped timer events
[Signal Supported Recording] (if available)
●
This function is Timer Programming which
is controlled by information from the TV
Guide; if programme start and end times are
changed by the broadcaster, the timer event
will follow the change. Note that this function
only works reliably if correct information is
received from broadcasters.
4
Store
■
To edit a timer event
select the event
access
Correct as necessary
●
To delete a timer event
(red)
●
To cancel a timer event temporarily
(blue)
Press again to stop cancelling.
•
Wed 21.10.2015 10:46
Date Start End
Wed 21.10.2015
STTL 17:00 18:30
(90 min.)
Wed 21.10.2015
18:00 20:00
(120 min.)
Guide
Thu 22.10.2015
21:30 22:30
(60 min.)

Using Media Player

Media Player allows you to enjoy photo, video or music
recorded on the USB Flash Memory / network device,
and content recorded with this TV to the formatted USB
HDD.
● For details, refer to [eHELP] (Media Player).
Photo mode:
Still pictures recorded with digital cameras are
displayed.
Video mode:
Moving pictures recorded with digital video cameras
and digital video data are played back.
Recorded TV mode (For exclusive USB HDD):
TV programmes recorded on the USB HDD with this
TV are played back.
Music mode:
Digital music data are played back.
■
To insert or remove the USB Flash Memory
Ensure alignment is straight and complete when
inserting or removing.
●
Connect the USB Flash Memory to the USB 1 or 2
port.
●
To remove the USB Flash Memory safely from the TV
[Safely remove USB] in [USB Device Setup]
(Setup Menu)
●
Check the terminal type and devices are correct for
connection.
●
For the USB HDD Connection
1
Insert the USB Flash Memory to the
TV
●
To play back content in the USB HDD / network
device, ensure the connection and settings are
completed.
2
Display [APPS List] and select [Media
Player]
(p. 27)
29
English