Remote Control - Panasonic TX-50DSF637 Operating Instructions Manual

Watching External
Inputs
Connect the external equipment (VCR, DVD, etc.) and
you can watch through the input.
●
For details, refer to [eHELP] (Watching > External
equipment).
1
Display the input selection menu
2
Select the input mode connected to
the equipment
select
watch
● TV receives input signals automatically connecting
with SCART when playback starts.
Input signals are automatically identified by the
•
SCART (pin 8) terminal.
This function is also available for HDMI
•
connections when [VIERA Link] is set to [On].
When input mode is not switched automatically,
•
perform as above or check the setup of the
equipment.
●
You can also select the input pressing the AV button.
Press repeatedly until the desired input is selected.
●
You can select [COMPONENT] and [VIDEO] in [AV2].
Operating the equipment with TV's

remote control

You can operate the content in Media Player / media
server, recording functions or the connected equipment
with the following buttons of this TV's remote control.
■
How to change the code
Each Panasonic product has its own remote control
code. Change the code according to the product for
operation.
Press and hold Standby On / Off switch
during the following operations
24
English
Enter the appropriate code,
see table below
Type of the equipment, features
DVD Recorder, DVD Player,
Blu-ray Disc Player
Player theatre, Blu-ray Disc
theatre
VCR
Using in USB HDD Recording,
Media Player, DLNA features or
VIERA Link
Change
Code
70
71
72
73
(default)