Datalogic Magellan 3200VSi Quick Reference Manual page 16

LED
INDICATION
Diagnostics
Prog. Mode
BEEPER
INDICATION
Power On Beep
Good Read
Indication
Diagnostics
Programming
Mode
Indications
8
Table 2. Green LED Indications
INDICATION
Varies (see Error
Codes on page 9
for more informa-
tion)
See Host Disable
above.
Table 3. Beeper Functions
INDICATION
Single beep
Single beep
Varies (see Error
Codes on page 9
for more informa-
tion)
Varies depending
upon the fea-
ture(s) being con-
figured.
COMMENT
The LED can provide diagnostic feed-
back if the scanner discovers a prob-
lem during SelfTest.
The scanner is in Programming Mode.
COMMENT
The Power-On LED indication is a config-
urable feature which can be enabled or
disabled. When enabled, this beep indi-
cates the scanner has finished all its
power up tests and is now ready for oper-
ation.
The good read beep indication is configu-
rable. Options include: Enable/disable,
frequency, duration and volume. See the
Product Reference Guide (PRG) for more
information.
The Beeper can provide diagnostic feed-
back if the scanner discovers a problem
during SelfTest.
The Beeper will sound as programming
barcode labels are scanned, indicating
progress during scanner configuration.
TM
Magellan 3200VSi