Control Panel Nn-Cf873S - Panasonic NN-CF873S Operating Instructions Manual

Control panel NN-CF873S

2
3
6
9
12
„ Note
1� The oven will enter stand-by mode
after the last operation has completed�
When in stand-by mode, the brightness
of the display will be reduced�
2� When in stand-by mode, it is necessary
to open and close the oven door
before operating the oven�
3� If an operation is set and Start is
not touched within 6 minutes, the
oven will automatically cancel the
operation� The display will revert
back to colon or clock mode�
1 Display window
2 Slider bar (plus/minus)
Select the time or weight by tapping "+"/"-"
or by swiping the slider bar� Maximum
cooking time is 9 hours�
1
3 Convection
4 Microwave
5 Grill
6 Turbo-cook
7 Timer/Clock
8 Turbo-bake
9 Turbo defrost
10 Auto weight programs
11 Auto sensor programs
12 Stop/Cancel:
Before cooking:
One touch clears your instructions
4
During cooking:
5
One touch temporarily stops the cooking
program� Another touch cancels all
7
your instructions and the time of day will
8
appear in the display�
13 Start
10
Touch to start operating the oven� If during
11
cooking the door is opened or Stop/Cancel
is touched once, Start has to be touched
again to continue cooking�
13
This oven is equipped with an energy saving
function�
„ Beep sound
A beep sounds when a key is touched� If
this beep does not sound, the setting is
incorrect� When the oven changes from one
function to another, two beeps sound�
After the completion of the preheating on
GRILL, CONVECTION or COMBINATION
mode, three beeps sound� After completion
of cooking, the oven will beep 5 times�
15
EN