Table of Contents
Advertisement
MENU SCREEN 4
Recording mode and video output are selected on Menu Screen 4.
w
Recording time mode selection
When recording starts, the set time mode is always
established.
OFF: The time mode can be set as desired using the
time mode button on the VTR's sub panel. The mode
can be changed even during recording.
9H: 9-hour mode
L24H: 24-hour mode (linear slow recording)
54H/72H/96H/120H/168H/192H/240H/336H: 54-/72-/
96-/120-/168-/192-/240-/336-hour mode (time lapse
recording)
e
Selection of VTR operation when cassette is
inserted
STOP: Stop mode
REC: Simply by inserting the cassette tape, recording
is started automatically.
REW REC: When the cassette is inserted, it is first
rewound to the start of the tape and then recording is
started automatically.
r
Selection of operation when tape end is detected
during recording (see page 19)
STOP: Stop mode
REW: The tape is automatically rewound to the start
where it stops.
REPEAT: The tape is automatically rewound to the
start, and recording is repeated.
EJECT: The tape is ejected.
MENU SCREEN 5
The internal timer recording modes are set on Menu Screen 5.
i
Internal timer recording mode setting (see page
17)
This sets the weekly timer or daily timer recording
mode. (OFF/ON)
OFF: Internal timer recording is not set.
ON: Internal timer recording is set.
MENU SCREEN 6
The summer time mode and search dial and jog dial operation mode are set on Menu Screen 6.
o
Selecting the summer time mode
Select the summer time mode.
ON: The summer time mode is selected.
OFF: The summer time mode is not selected.
p
Setting the start time for the summer time mode
Set the week, month and hour at which the summer
time mode is to start.
WEEK: Select 1ST, 2ND, 3RD, 4TH or LST (last) and
one of SUN through SAT.
MONTH: Select the starting month (1 – 12).
TIME: Select the start time (1:00 – 22:00)*.
Do not adjust the time setting between 23:00 and 1:00
during the summer time period.
t
Video signal mode
This selects the operation of the colour/black-and-
white automatic selector circuit.
AUTO: The circuit automatically identifies the type of
video input or playback signals, and selects the colour
or black-and-white mode accordingly.
COLOUR: The colour mode is forcibly established.
B_W: The black-and-white mode is forcibly es- tab-
lished.
y
Playback picture selection
This selects the quality of the playback pictures.
DETAIL: Detail mode (resolution)
NORMAL: Normal mode (intermediate)
SOFT: Soft mode (high S/N ratio)
While a mode other than REC or REC/PAUSE has
been established for the unit, the picture quality
setting can be changed also be pressing the REC
REVIEW button. For further details, refer to page 23.
u
NOISE_B MASK selection in playback system
OFF: Standard playback system
ON: Noise masking playback system
Notes:
•
When connecting the frame switcher, select "OFF".
•
When the picture quality does not improve with
tracking adjustment, select "ON".
Note:
Internal timer recording does not operate when the
date and time have not been set.
a
Setting the end time for the summer time mode
Set the week, month and hour at which the summer
time mode is to end.
WEEK: Select 1ST, 2ND, 3RD, 4TH or LST (last) and
one of SUN through SAT.
MONTH: Select the ending month (1 – 12).
TIME: Select the end time (1:00 – 22:00)*.
s
Search dial direct operation mode
Set the operation mode when the search dial is to be
used from another mode.
ON: The dial can be operated directly during STOP
and STILL.
OFF: The dial can be operated after the STILL mode
is activated.
* Minutes are for reference only and cannot be adjusted.
11
Advertisement
Table of Contents
