Table of Contents
Advertisement
TCD410NL_E.book Page 27 Thursday, March 20, 2003 5:55 PM
Before programming, please follow steps 1 to 2.
1
2
Press MENU.
Search/Select
"SETTING BS".
International Carrier Services
Automatic Route Selection (ARS) is also used for international calls.
After subscribing to a second international carrier service, store the second international
carrier code.
For certain countries, the second international carrier services cost more than the first
carrier service.
Store "00 (internal code)" and then country codes (up to 25 codes) instead of area codes.
If you have stored a phone number beginning with "00 " in the speed dial memory and
you use a second carrier service which does not require "00 ", turn the delete mode ON.
To Turn the International Code "00" Delete Mode ON/OFF
Some international carrier services do not require "00" before the country code.
In this case turn the delete mode ON. "oo" will automatically be deleted when
dialling.The factory preset is OFF.
4-digit
3
4
Base Unit
9
PIN
*1
Automatic Route Selection On/Off
4-digit
3
4
Base Unit
9
PIN
*1
• To exit the operation, press
*1 The factory preset is 0000.
"INPUT CODE"
1
On
5
6
3
OR
Off
0
1
On
5
6
1
OR
Off
0
any time.
Base Unit Settings
7
Press OK.
7
Press OK.
27
Advertisement
Table of Contents
