All Group Play/Program Play/Random Play - Panasonic SC-HT500 Operating Instructions Manual

[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Common procedures for all group, program
and random play
While stopped
Press [PLAY MODE].
Each time you press the button:
All group ([DVD-A])>Program>Random
^----------Off (Normal play)(_-----}
[DVD-A]
If you select bonus groups, you will have to enter a password
( page 15).
All group play
[DVD-A]
Press [1] (play).
ALL PGM ALL
Program play
You can select up to 32 items to play in the order you choose.
Example [DVD-V]
Choose a title and chapter, then press ENTER.
PROGRAM
No T C Time
Play
1
Clear
Clear all
0 9
SELECT
NUMBER
SELECT
Press PLAY to start
ENTER RETURN
1
Press the numbered buttons to select a
title, chapter, group or track (
then press [ENTER]).
TTL CHAP ALL PGM RND
Title No. Chapter No.
≥To select a 2-digit number
Example: To select item 25, press [S10]
[WMA] [MP3]: [2]
≥Repeat this step to program other items.
≥To select an item using the cursor buttons
Press [ENTER] and [3, 4] to select an item, then press
[ENTER] again to register the number.
All the items in the selected disc, title or group are selected
when you select "ALL".
2
Press [1] (play).
[WMA] [MP3]
D.MIX PG
Program No.
[2] [5].
[5] [ENTER].
To add or change the program
Press [3, 4] to select an available item, then repeat step 1.
To move to the page before or after the one shown
Press [6, 5].
To clear an item
1 Select the item you want to clear with [3, 4].
2 Press [CANCEL], or select "Clear" with [3, 4, 2, 1] and press
[ENTER].
To clear the whole program
Select "Clear all" with [3, 4, 2, 1] and press [ENTER].
[Note\
≥[DVD-V] [WMA] [MP3]
Times are not displayed while programming.
≥The program is cleared when you switch the unit to standby, open
the disc tray, select another source, or exit the program mode by
pressing [PLAY MODE].
Random play
1
[DVD-A] [DVD-V]
Press the numbered buttons to select
a title or a group.
Example [DVD-V]
Random Playback
0Press PLAY to start
ALL PGM RND
[DVD-A]
≥You can select more than one group.
≥To enter all groups, select "All" using [2, 1] and press
[ENTER].
≥To deselect a group, press the numbered buttons
corresponding to the group you want to clear.
2
Press [1] (play).
Title 1
RQT6835
17