Clamper - Panasonic TY-CE42PS20 Installation Instructions Manual

Fitting procedure
9. Gather the cables
• For details on wiring, see the instruction manual of the plasma display.
• Bundle the cords and cables connected to the terminals at the bottom of the back side of the plasma display, and
secure them using the two clampers  .
• Do not bunch the power cord together with other cords and cables.
Cable
Removing the plasma display
• Return the ceiling unit angle to 0º, then remove the two
screws for securing unit  on the left and right sides of
the ceiling unit.
 Lift the lower part of the plasma display,
 pull outward
 and lift upward.
18
Clamper 
Clamper 
Cable
Screw for securing unit 
(M5-35)
③
①
Insulation spacer
②