Demolition Of The Machine; Ecological Information - TECNO.MEC SYMBOL Operating Instructions Manual

- now let the pump work and open the spray gun for a few seconds to allow the
circulation of the liquid and verify it flows from the lance
- to make the descaling easier let the burner operate for about 30 seconds
- stop the machine for about 3-4 minutes
- operate the pump, open the spray gun and let all the descaling liquid flow
- close the detergent intake regulator
- rinse putting clean water into circulation
CAUTION: the descaling liquid contains acid substances which could damage the
objects to be cleaned: Be sure to have correctly rinsed them.
- carefully clean the detergent tank filling with clean water
- clean the lance nozzle and retighten it
6) From time to time check the wear of electrodes, the right distance from one end to the
other is 3 mm.
7) Replace the high pressure water hose every 2 working years or when it is necessary.
Before use verify that the pressure features of the new hose correspond to those of the
machine.

DEMOLITION OF THE MACHINE

When you decide to discard the machine it is necessary to make it inactive:
- disconnect from the electrical mains
- cut the external electric cable
- cut the motor cable
- take away the wheels
- empty the inner tanks

ECOLOGICAL INFORMATION:

The elimination of waste arising from demolition of the machine must be carried out in a manner
which does not pollute ground, water and air. Consult your local laws for more information.
DISCARDING WASTE MATERIALS:
- Ferrous materials, aluminium, copper are recyclable and must be brought to an
authorised collecting center
- Plastic materials must be carried to a proper recycling center (if one exists for such
purposes) or to a dump or burning center
- Exausted oils must be brought to an authorised collecting center.
Technical features of the product can be modified by the manufacturer at any time.
14