TECNO.MEC SYMBOL Operating Instructions Manual page 11

- Do not touch the exaust device until it is completely cool
- Never leave the machine unattended when it is running. In case of long stops it is
compulsory to switch it off.
- To protect against parts rebounding, it is necessary to wear protective clothes
(especially during sandblasting or descaling operations, etc.)
- If the machine is used in a danger zone (for example petrol pumps) act according to the
safety rules
- Thanks to a safety device, the
machine automatically stops if it is
inactive for more than one minute. To
use it again, it is enough to open the
spray gun
- Do not repair or adjust the working unit
before switching off the power and
disconnecting the plug from the electrical
network
- Do not store the unit in closed rooms or
in places with insufficient ventilation. The
machine must have the possibility to blow
off gas exaust and to restore air
11