Advertisement
TCD230_240FX(e)_QG.fm Page 6 Friday, May 20, 2005 11:59 AM
Turning the power on
Press {ih} for about 1 second.
Setting dialling mode (tone/pulse)
1
Press {j/OK}.
2
Select "Base Unit Setup", then press {>}.
3
Enter "0000" (default base unit PIN).
4
Select "Call Options", then press {>}.
5
Select "Dial Mode", then press {>}.
6
Select the desired setting, then press {>}.
7
Press {ih}.
Setting the date and time
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Time Settings", then press {>}.
4
Select "Set Date & Time", then press {>}.
5
Enter the current day, month and year by selecting 2 digits for each.
6
Enter the current hour and minute by selecting 2 digits for each.
L You can select "AM", "PM" or 24-hour time entry by pressing {*} repeatedly.
7
Press {j/OK}.
8
Press {ih}.
Handset basic operations
Feature
To turn the power off
To make a call
To turn on the speakerphone
To hang up
To adjust the receiver or speaker
volume
To redial the last number dialled
To make a call using the redial list
To answer a call
Operation
Press {ih} for about 2 seconds.
Dial the phone number, then press {C}.
Press {s}.
Press {ih}.
Press {e} or {v} while talking.
Press {R}, then press {C}.
Press {R}. Press {e} or {v} repeatedly to
select the desired number, then press {C}.
Press {C}.
–
–
6
Advertisement
