Advertisement
Operating Instructions
Model No. KX-TC2100AL
Copyright:
This material is copyrighted by Panasonic Communications (Malaysia)
Sdn. Bhd., and may be reproduced for internal use only. All other
reproduction, in whole or in part, is prohibited without the written consent
of Panasonic Communications (Malaysia) Sdn. Bhd.
For your future reference
Serial No.
(found on the bottom of the unit)
Name and address of dealer
Attach or keep original receipt to assist with any repair under
warranty.
Manufactured by Panasonic Communications (Malaysia) Sdn. Bhd.
Senai Malaysia
Cordless Phone
KX-TC2100NZ
PLEASE READ
BEFORE USE AND
SAVE.
Charge the battery for
about 9 hours before
initial use.
Contents by
1 Getting Started
2 Making/Answering Calls
3 Speed Dialler
4 One-Touch Dialler
5 Special Features
6 Things You Should Know
Date of purchase
PQQX14812ZA F0605HAO
Advertisement
Related Manuals for Panasonic KX-TC2100AL
Summary of Contents for Panasonic KX-TC2100AL
-
Page 1: Cordless Phone
5 Special Features 6 Things You Should Know Copyright: This material is copyrighted by Panasonic Communications (Malaysia) Sdn. Bhd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications (Malaysia) Sdn. -
Page 2: Location Of Controls
—KX-TC2100AL: Use a telephone double adaptor. —KX-TC2100NZ: Use a T-adaptor. • KX-TC2100AL and KX-TC2100NZ are not designed to be used with rotary (pulse dialling) services. Install the battery in the handset, and close the handset cover, locking it into place. -
Page 3: Making/Answering Call
To select the dialling mode TONE The TALK indicator light must be off before programming. Press {PROGRAM} N {AUTO} N {*} twice (TONE) N N {PROGRAM}. • A beep sounds. • To cancel during programming, press {PROGRAM}. • If 3 beeps sound during programming, a wrong key was pressed. 2 Making/Answering Call {TALK} {REDIAL}... -
Page 4: Speed/One-Touch Dialler
3 Speed Dialler {TALK} {AUTO} TALK Indicator Memory Station Numbers {PROGRAM} {PAUSE} 4 One-Touch Dialler {DIRECT} {TALK} {AUTO} TALK Indicator Memory Station Numbers {PROGRAM} 3-A Storing Phone Numbers in Memory You can store up to 10 phone numbers. The dialling buttons ({0} to {9}) function as memory stations. The TALK indicator light must be off before programming. - Page 5 RECHARGE indicator flashes, the battery needs to be replaced. Replace the battery with a new Panasonic P-P301 (KX-A36A) battery. See section 1-C, step 3. When replacing the battery, programmed information may be erased. Reprogram if necessary.
- Page 6 For Australia Customers Customer Support Centre Tel No: 136200 or website www.panasonic.com.au Sales Department: Panasonic Australia Pty. Limited Austlink Corporate Park, 1 Garigal Road, Belrose NSW2085, Australia For New Zealand Customers Customer Support Centre Tel No: (09)2720178...
-
Page 7: Special Features
The recall time depends on your telephone exchange or host PBX. You can select the following recall times: “90, 100, 110, 250, 300, 400, 600 or 700 msec (milliseconds)”. KX-TC2100AL preset is “100 msec” and KX-TC2100NZ is set to “600 msec”.