Location Of Controls; Getting Started; Base Unit - Panasonic KX-TC2100AL Operating Instructions Manual

1 Getting Started

1-A Accessories
A AC Adaptor . one A Battery . . . . . one
A Telephone Line Cord . . . . . . . . . . . . one
A
For Australia For New Zealand
A Handset Cover . . A Wall/Desk Stand . .
one one
For Australia only
A Telephone plug . . . . . . . . . . . . . . . . . one
1-C Settings
1
Install the Wall/Desk stand before use.
Insert the hooks in the direction (1) then push the tabs as
shown (2).
• The word "UP DESK" should face upward.
1
2
Connect as shown.
Fasten the AC adaptor cord.
Hooks
• If you subscribe to an xDSL service
• Please attach a noise filter (contact your xDSL provider) to the telephone
line between the base unit and the telephone line jack or socket in the
event that noise is heard during conversations.
1-B Location of Controls
Handset
{TALK} Button (2-A)
{AUTO} Button
(1-C, 3-A, 5-C)
{RECALL} Button
(5-C)
{PROGRAM} Button
(1-C, 3-A, 4-A, 5-C)
{LOUD} Button (2-A)
2
2
For New Zealand
To Single-Line
Telephone Jack
Noise Filter
(For xDSL users)
For Australia
To Socket
AC Adaptor
To Power Outlet
(AC 230–240 V, 50/60 Hz)
Antenna
{DIRECT} Button
(4-A)
{REDIAL} Button
(2-A)
TALK/RECHARGE
Indicator (6-A)
{RINGER}
Button (2-B)
{PAUSE}
Button (5-B)
{CH} (Channel)
Button (2-A)
Charge Contacts (6-A)
• USE ONLY WITH Panasonic AC ADAPTOR PQLV16AL.
• The AC adaptor must remain connected at all times.
(It is normal for the adaptor to feel warm during use.)
• The unit will not work during a power failure. If you want to connect to a
standard telephone on the same line;
—KX-TC2100AL: Use a telephone double adaptor.
—KX-TC2100NZ: Use a T-adaptor.
• KX-TC2100AL and KX-TC2100NZ are not designed to be used with
rotary (pulse dialling) services.
3
Install the battery in the handset, and close the handset cover,
locking it into place.
4
Charge the battery for about 9 hours.
• See section 6-A for more details.
• The CHARGE indicator lights.
OR
CHARGE
Indicator

Base unit

Antenna (1-C)
IN USE/CHARGE
Indicator (1-C, 5-A)
{HANDSET LOCATOR}
Charge
Contacts
Button (5-A)
(6-A)
Black
Lead
Extend
the
antenna
fully.
Red
Lead