Download Print this page

Olympus C-3030ZOOM Instructions Manual page 45

Hide thumbs Also See for C-3030ZOOM:

Advertisement

SELEC
CHEC
AUTO
HOW T
ADJUS
T A KING
ST ORING
CONT
Note:
Warning
Incorrect
¥ B e sure t
responsib
Flash button (P. 64) / Erase button
Shutter priority mode ................................................................59
AC adap
Number of Still Pictures that can be Taken
5
4
LCD monitor
SmartMedia
5
(P. 113)
¥ U se an A
Manual mode............................................................................61
3 Subjects in excessively bright light
• Use 3V (3.3V) cards only. 5V cards cannot be used.
P F2.8 1/800
About print settings.................................................................166
(SSFDC-16MB)
¥ N EVER
Recording mode
Zoom ........................................................................................62
The flash will fire automatically in low-light and backlight conditions.
Spot/Macro button
• Olympus brand cards are recommended (already formatted). Non-
When the power is turned on in the Record Mode, the remaining battery
Print-reserve ...........................................................................168
¥ I f the cor
Diopter adjustment dial
Exposure compensation ...........................................................63
(P. 68) /
Olympus brand cards must be formatted by the camera.
You can easily turn the camera on or off or change the mode using the
power will be displayed on the control panel.
emitting
All-frame print reserve ........................................................168
Print button (P. 168)
Using the flash..........................................................................64
• When using a special function SmartMedia card (optional), insert it in the
Mode dial.
Viewfinder
authorize
Single-frame print reserve ..................................................170
2
same way.
Spot metering mode .................................................................68
¥ M ake sur
Viewfinder
Trimming print reserve........................................................174
TIFF
Macro mode..............................................................................69
Aperture priority
disconne
lights and turns off automatically.
Resetting print reserve........................................................177
Viewfinder
Macro + Spot metering mode ...................................................70
Shutter priority
¥ M ake sur
Batteries are OK. You can shoot.
15 °
(P. 25)
Manual
Manual focus ............................................................................71
¥ W hen dis
Index labels (2 pieces)
Caution:
Lock the focus on an object that is at the same distance from the camera
Autofocus mark
adapter. N
Still picture record menu...........................................................73
as the subject, then aim at the subject to take the picture. (p. 53)
• NEVER open the card cover, eject the card, remove the batteries, or
5
USING A PERSONAL COMPUTER ....................179
SHQ
¥ I f there is
Sequence mode .......................................................................74
Program
pull the plug while the camera is in operation. It may destroy the
blinks and other indicators on the control panel are displayed
stop usin
Computer system requirements .............................................180
HQ
Selftimer/Remote control ..........................................................76
data in the card.
4 Subjects at different distances
normally.
service c
LCD monitor
PROPER SHUTTER RELESE
Installing provided software ....................................................181
Power off
• The card is a precision instrument. Handle it carefully and do not
When you take a picture that is backlit, position the subject within the
Auto bracket .............................................................................80
HIGH (quality)
Battery power is low and batteries should be replaced.
6
(P. 26)
¥ K eep the
Connecting to a personal computer........................................182
subject it to physical shocks.
White balance...........................................................................82
backlighting correction marks to fire the flash.
Press the Shutter release button halfway to lock the focus and
use.
NORMAL
• Do not touch the contact area of the card.
Using a personal computer.....................................................183
ISO ...........................................................................................84
SQ1
exposure.
P or A/S/M (Still picture recording) (p. 48 ~ 107)
HIGH (quality)
Instructions
Transferring data from SmartMedia........................................184
Flash correction ........................................................................86
RED-EYE REDUCING FLASH
blinks and other indicators on the control panel go out.
Scroll
With P, the camera selects the optimal aperture and the shutter speed
PC card adapter .................................................................184
Slow shutter synchronization flash mode .................................88
NORMAL
Batteries are dead and should be replaced immediately.
automatically.
This mode significantly reduces the phenomenon of "red-eye".
FlashPath floppydisk adapter .............................................184
Battery compartment cover
Extension flash photography ....................................................90
HIGH (quality)
With A/S/M, you can set the aperture or the shutter speed or both for
(P. 28)
SmartMedia READER/WRITER .........................................184
Taking photographs using the FL-40 extension flash ...........90
• The timing of each battery level indicator varies depending on the type
Lock the focus on an object that is at the same distance from the
NORMAL
yourself. (p. 58 ~ 61)
Using CAMEDIA Master .........................................................185
Taking photographs with the FL-40 extension
of batteries used.
SQ2
camera as the subject, then aim at the subject to take the picture. (p. 53)
HIGH (quality)
Processing images using CAMEDIA Master ..........................187
flash only ..............................................................................92
• If NiMH batteries are used, the battery low warning will blink faster than
Note:
(Movie picture recording)
Taking photographs with another brand of
when lithium battery packs are used.
NORMAL
5 Fast-moving subjects at close distances
• The main flash cannot be used in the Sequence mode.
You can shoot movies of up to approx. 186 seconds in length in the SQ
extension flash......................................................................93
• If the recording mode is set to TIFF, sound will not be recorded with a
• When using an extension flash, set the speed fast enough to follow the
mode and 46 seconds in the HQ mode (when a 16MB card is used).
Digital zoom mode....................................................................96
picture when the Mode dial is set to P or A/S/M, but it can be added
Note:
sequential shooting.
(p. 128 ~ 149)
Picture effects...........................................................................98
• Do not push the LCD monitor forcibly.
later during playback. (p. 118)
• Since the LCD monitor's picture blacks out while taking pictures in the
Selftimer/Remote
Press the Shutter release button fully to release the shutter and
• Pictures that appear on the LCD monitor are for composition purposes
Sound record mode ..................................................................99
Sequence mode, use the viewfinder to take pictures in this mode.
Scroll
control signal
Seconds that Movies can be Photographed
take the picture.
only.
• Unless OFF is selected in All Reset, the setting will be canceled when the
Panorama mode .....................................................................101
OFF (Power off)
Battery compartment open/close
• It is recommended to use the optical viewfinder for less camera
power is turned off. (p. 194)
Card setup (card format) ........................................................103
Recording
switch (bottom) (P. 28)
Note:
movement and battery consumption.
• This mode cannot be used in the TIFF recording mode.
mode
Selecting the recording mode.................................................105
Lock the focus on an object that is at the same distance from the camera
Note:
• It will take longer to record when the LCD monitor is used.
Caution:
• Since the slowest shutter speed in the Sequence mode is set to 1/30
VIEWFINDER DISPLA
(Display)
A/S/M mode............................................................................107
• The camera emits pre-flashes before the regular flash.
HQ
as the subject, then aim at the subject to take the picture. (p. 53)
Note:
• When the subject is viewed diagonally in the camera, the edges may
second to prevent camera movement, the resulting picture may be darker
• NEVER open the card cover, eject the card, remove the batteries, or
You can observe the pictures you have taken.
• It takes about a second before the Shutter is released.
appear zigzagged on the LCD monitor. This is not a malfunction; it will be
• When the Mode dial is set to
SQ
Note:
[Display Mode]
than expected.
pull the plug while the Card access lamp is blinking.
• Performance may be limited when the subject is not looking at the pre-
less noticeable in Display mode.
to display the Menu.
Note:
• When taking pictures on a special occasion, on a trip, or in cold
• Sequential shooting will continue for as long as the Shutter release button
Displaying recorded pictures ..................................................108
flashes from right in front of the camera, or due to medication/alcohol
• In the Record Mode, you can take pictures without pressing the OK
• A strip of light may appear on the top/bottom of the LCD monitor, but this
• The Selftimer/Remote control mode will remain after a picture is taken
temperatures, keep spare batteries handy. (p. 13)
is held down. When the Shutter release button is released, Sequential
Index-display mode.............................................................110
intake or individual characteristics.
Note:
is not a malfunction.
using the Remote control.
button. The adjustment will be valid until the Menu is canceled.
• When the camera is being operated on batteries that are running low, the
shooting stops.
• Because the amount of data used varies depending on the subject,
Close-up display mode (3X inspection)...............................111
• When the Orange lamp next to the viewfinder blinks, the flash is being
• When a picture is taken in a lighted area, such as in sunlight, vertical lines
• Press the Menu button without pressing the OK button to cancel the
• The working distance may be reduced in brightly lit areas, such as under
Note:
camera may emit several short beeps and blink the number of storable
• Even if the Sequence mode is switched to another mode after taking
more/fewer pictures than the number shown may be photographed.
Protection................................................................................112
may appear on the LCD monitor. This is not a malfunction.
charged. (p. 64)
adjustment and the Menu.
direct sunlight.
• Press the Shutter release button gently using the ball of your finger.
pictures on the control panel after you take a shot or when you turn on the
Note:
sequential pictures, it will not be possible to take another picture until
• The number of storable pictures may not be reduced every time a picture
Note:
One-frame erase.....................................................................113
• Printed images will be slightly larger compared with what you see in the
• Printed images will be slightly larger compared with what you see in the
• Unless OFF is selected in All Reset, some adjustments will be canceled
• Avoid moving the camera when pressing the Shutter release button to
• Do not subject the Remote control window to bright light.
power. If this happens, the picture you have just taken will not turn out
• Unless OFF is selected in All Reset, the setting will be canceled and reset
is taken, or increased when a picture is erased.
recording in the card finishes.
• Unless OFF is selected in All Reset, the setting will be canceled when the
Still picture display menu ........................................................114
and reset to the default when the power is turned off. (p. 194)
viewfinder or on the LCD monitor.
viewfinder or on the LCD monitor.
• When the remote control is not operated for approx. 3 minutes, the
prevent blurry pictures.
to Auto-Flash when the power is turned off. (p. 194)
properly. Replace the batteries and take the picture again.
• The speed will be slower with AF
• Numerical values are approximate.
power is turned off. (p. 194)
Selftimer/Remote control mode will be canceled.
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
Downloaded from ManualsCamera.com Manuals
FLA
TTE
T A F OR . .. 1
6
Number
+ 2.0
File
of pixels
Jog dial (P. 44)
2048 x 1536
1600 x 1200
1
P
1280 x 960
TIFF
5
1024 x 768
15 °
640 x 480
P
2048 x 1536
2048 x 1536
1600 x 1200
16.4ft
1280 x 960
LCD monitor
JPEG
F2.8 1/800 + 2.0
P
DRIVE
1024 x 768
Orange lamp
WB
AUTO
ISO
AUTO
640 x 480
O
OFF
SLOW
[
Remote control window
1/3 page
Number of pixels
320 x 240
160 x 120
, the card must contain images in order
Autofocus mark (p. 48/53/131)/
Backlighting correction mark (p. 65)
MO
Press
Whe
Whe
Press
Press
Jog d
Jog d
no lo
blink
to ad
secon
came
to tak
next
Press
Whe
If yo
5
5
5
5
5
Static-free case
the s
arrow
press
Mode dial (P. 37)
Memory capacity
Menu
confi
settin
2MB
4MB 8MB 16MB 32MB 64MB
Shutter release button
Menu
(P. 39)
0
0
1
Set the Mode dial to P or A/S/M.
• Turn the Diopter adjustment
6
6
Compose the picture, aim the
6
• The Shutter will not release
• The recorded image will not be
0
0
Press
dial to see the Autofocus mark
remote control at the Remote
displayed if the Rec view is off.
while the Green lamp is
the a
1
0
clearly.
Movie picture recording
control
window
(p. 207)
blinking.
Backlighting correction
Menu
2
0
1
camera,
With each press of the Flash
mark
• If CHECK is selected in REC
• Pictures can also be taken
Write-protect adhesive
Shutter release button on the
mode button, the flash mode
4
1
VIEW in MODE SETUP, you
without pressing the OK
• Press the OK button to save
7
seals (4 pieces)
will switch from Auto-Flash to
remote control to take a
button. (P. 78/79)
can select whether to save the
1
0
the setting and cancel the
picture.
(Red-Eye Reducing Flash,
photographed image or erase
Menu.
2
4
p. 65),
• The Selftimer/Remote control
(Fill-In Flash, p. 66)
it. (p. 208)
• Sequential shooting is possible
2
Display
1
and
signal blinks for approx. 3
(Flash Off, p. 66).
up to 5 frames.
• The selected flash mode
seconds before the picture is
7
15
3
(except
taken. If the signal does not
2
4
• The Green lamp next to the
appear on the control panel.
blink when the Shutter release
11
22
5
viewfinder lights.
button is pressed, move closer
• If the Green lamp blinks, the
6
12
3
to the camera and press it
focus or exposure is not
3
again. The signal does not
16
7
If the Orange lamp lights when
32
locked.
light when there is frequency
the Shutter release button is
Control panel
6
14
28
• To focus the camera when the
interference. In such a case,
pressed halfway, the flash is
subject of the picture is outside
30
61
15
change
ready to fire.
the auto focus mark, use focus
according to the remote
lock. (p. 53/131)
1 / 3
]
control instructions.
• See page 124 for using the
Remote control in the Display
mode.
Threaded mount (bottom)
• The camera emits a beep
Memory capacity
sound when the shutter is
2MB
4MB
8MB 16MB Over 32MB
released.
Y
5
11
23
• The Card access lamp blinks
22
45
92
while the picture is being
recorded.
.
(with sound)
0
1
3
1
2
5
11
2
4
8
17
on
the
Zoom lever
3
6
13
27
then
press
the
(P. 62/133)
8
16
33
66
OK button (P. 45)
MF button (P. 72/
3
6
13
27
136)
9
19
39
78
Protect button
(P. 112)
5
11
22
44
LCD monitor
30
60
120
ON/OFF button
Auto-Flash)
will
8
16
33
67
(P. 50/128)
45
Card access
90
181
lamp (P. 36/39)
25
51
102
Menu button
66
132
266
(P. 44)
58
117
234
123
248
498
the
frequency
46
75
186
300
Orange lamp
3
4
3
3
3
(flash) (p. 64)
Green lamp
(p. 48/57)
15
6

Advertisement

loading