Philips Bdl4330ql User Manual page 33

Picture Format: Change the display area of the image. You can select a
suitable format. Choose from: Auto zoom/Movies expand 16:9/Wide
screen/Unsealed/4:3
Video Source: Choose input source. Choose from USB/Network/
Internet/SmartCMS/CVBS/YPbPr/VGA/HDMI/DVI-D
Auto Adjust: Use the auto adjust function to automatically to optimize
the display of the image position.
1.5. Click Audio to switch to Audio Page. It provides you an easy way to
adjust audio settings.
Volume: Adjust to increase or decrease the volume. 0(minimum) to 60
(maximum).
Treble: Adjust to increase or decrease higher-pitched sounds.
-8(minimum) to 8(maximum).
Bass: Adjust to increase or decrease lower-pitched sounds. -8(minimum)
to 8(maximum).
1.6. Click on Color to switch to Color Page. It provides you an easy way
to adjust color settings.
Tint: Change the color balance. Choose from Cool/Normal/Warm/
Custom
Custom tint: With this function you can adjust the color tones of the
image precisely by changing the R(Red), G(Green) and B(Blue) settings,
respectively.
Note: Custom tint only available when Tint is set to Custom.
1.7. Click on Tiling to switch to Tiling Page. With this function you can
create a single large-screen matrix (video wall) that consists of up to
225 sets of this display (up to 15-
sets on the vertical and 15-sets on the horizontal sides).
H Monitor: Adjust displays on the horizontal side.
V Monitor: Adjust displays on the vertical side.
Position: Adjust the position of this display in the screen matrix.
Frame Comp.: Choose to turn the frame compensation function on or
off.
Enable: Choose to {On} or {Off} the Tiling function.
powering-on for each display
Note:
2 x 2 screen matrix(4 displays)
5 x 5 screen matrix(25 displays)
25
BDL4330QL