Settings; Picture - Philips Bdl4330ql User Manual

BDL4330QL
5. Change your settings
Using the remote control:
1. Press [ ] HOME button to display the OSD menu.
2. Press [ ] [ ] [ ] or [ ] button to choose its menu item or to
adjust its value. Press [
3. Press [ ] BACK button to go back to the previous menu layer.
4. Press [ ] HOME button to exit the OSD menu.
Using the display's control buttons
1. Press [ ] button to display the OSD menu.
2. Press [ ] [ ] [ ] or [ ] button to choose menu item or adjust
its value.
3. Press [ ]
submenu.
4. Press [ ] button to exit the OSD menu.
5.1.

Settings

Press [ ] HOME button.
]

5.1.1. Picture

Picture
Sound
Tiling
Network
Storage
General settings
m e n u
Picture style
Backlight
Adjust the brightness of this display's backlight.
Colour
Adjust the colour saturation of the picture.
Sharpness
Adjust the sharpness of the picture.
Noise reduction
Choose the amount of noise reduction for the picture.
MPEG artifact
Smoothen transitions and haziness in the digital picture.
Picture enhancement
Fine-tune each pixel to match surrounding pixels and produce a brilliant,
{Advanced sharpness}: Enable superior sharpness, especially on
lines and contours in the picture.
{
dark, medium and light areas of the picture.
{
details of colours.
Advanced
Access advanced settings such as gamma, tint, video contrast and so on.
{ }: Adjust the non-linear setting for picture luminance
and contrast.
{Tint}: Change the colour balance.
{ }: Customise colour balance setting. Only available
if {Tint} {
{Video contrast}: Adjust video contrast.
{Brightness}: Adjust screen brightness.
{Hue}: Adjust screen hue.
Scan mode
Change the display area of the image.
Format and edges
{
See page 14 for the descriptions about
18
Picture style
Backlight
Colour
Sharpness
Noise reduction
MPEG artifact
Picture enhancement
Advanced
Scan mode
Format and edges
Picture reset
}: Dynamically enhance the details in the
}: Dynamically enhance the vividness and
} is chosen.
}: Change the picture format.
Picture format
.