Soleus Air WM1-06E-01 Operating Instructions Manual page 15

Electronic window air conditioners
Hide thumbs Also See for WM1-06E-01:
Table of Contents

Advertisement

&$5( $1' &/($1,1*
Clean your air conditioner to keep it looking new
and to minimize dust build up.
$LU )LOWHU &OHDQLQJ
The air filter should be checked at least once
every month to see if it needs cleaning. Trapped
particles and dust can build up in the filter and
may decrease airflow as well as cause the
cooling coils to accumulate frost. To clean the air
filter:
1. Remove the filter by pulling down on the in-
dents of the filter door on the front of the unit.
(See FIG. )
2.
Wash the filter using liquid dish soap and
warm water. Rinse the filter thoroughly. Gen-
tly shake the filter to remove excess water.
3.
Let the filter dry completely before placing it
into the air conditioner.
4.
If you do not wish to wash the filter, you may
vacuum the filter to remove the dust and
other particles.
:HDU DQG 7HDU
To minimize wear and tear on the air condi-
tioner, always wait at least 3 minutes before
changing modes. This will help prevent the
compressor from overheating and the circuit
breaker from tripping.
,QGHQWV
)LJ 
&DELQHW &OHDQLQJ
To clean the air conditioner cabinet:
x
Unplug the air conditioner to prevent shock or
a fire hazard. The cabinet and front panel of
the air conditioner may be dusted with an oil-
free cloth or washed with a cloth dampened in
a solution of warm water and mild liquid soap.
Rinse thoroughly with a damp cloth and wipe
dry.
x
Never use harsh cleaners, wax or polish on
the cabinet front.
x
Be sure to wring excess water from the cloth
before wiping around the controls. Excess
water in or around the controls may cause
damage to the air conditioner.
:LQWHU 6WRUDJH
To store the air conditioner when it is not in use
for an extended period of time, remove it care-
fully from the window according to the installation
instructions and cover it with plastic or place it in
the original box
Error Codes
Error Codes
E2
Room temperature sensor failure
E3
Room temperature pipe sensor failure
If the Error Codes continue to display after unplugJL
ng and re-plugging the power cord, call our cusWRPH
mer service at 1-888-8-SOLEUS for further soluWLRQ
1
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm1-08e-01Wm1-10e-01

Table of Contents