Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hills S55939 PPRO-C-MID320-FFIR4
Summary of Contents for Hills S55939 PPRO-C-MID320-FFIR4
- Page 1 2MP Fixed IR Dome Camera Quick Reference Guide...
-
Page 2: Safety Precautions
Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading Do not overload wall outlets and extension cords as this can result All the safety and operating instructions should be read before the appliance is operated. -
Page 3: Fcc Compliance Statement
FCC Compliance Statement THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. - Page 4 Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. Some parts may differ depending on the situation. Item Network Camera CVBS Cable Installation CD (INIT/SiRiS Lite software, Operation Manuals) Quick Guide Guide Pattern MVD320-FFIR4 Nework Connecor Cover, Rubber (included with...
-
Page 5: Camera Installation
Camera Installation MVD320-FFIR4 Removing the Dome Cover MID320-FFIR4 Turn the dome cover counterclockwise. Remove the dome cover. Dome Cover Screw Lens Hole IR LED Bottom Cover Wall/Ceiling Power Installation Hole Factory Reset Button Cable Access Hole SD Memory Card Slot Network Port Video Out Safety wire... - Page 6 Inserting a SD Memory Card Installation Push the SD memory card until it disengages MID320-FFIR4 from the slot, and then pull it out. Insert a SD memory card into the SD memory card slot with the ‘microSD’ printed facing upward. Use the provided guide pattern to check the distance between the screw holes if necessary.
- Page 7 Use the screws, anchor provided with the camera MVD320-FFIR4 to secure the bottom cover on a wall or a ceiling. Route the network cable and wires of the power adapter through the rubber. Wires Rubber When routing the network cable, use the enclosed network connector cover.
- Page 8 Use the screws, anchor provided with the camera Closing the Dome Cover to secure the bottom cover on a wall or a ceiling. MID320-FFIR4 Attach the enclosed desiccant in the bottom cover to prevent moisture. Attach the dome cover to the bottom cover. Turn the dome cover clockwise to fasten the dome cover.
-
Page 9: Angle Adjustment
MVD320-FFIR4 Angle Adjustment MID320-FFIR4 Lens Rotation Horizontal Rotation Vertical Rotation Specifications Vandal Resistance Yes ( MVD320-FFIR4 model only) Out-door Ready MVD320-FFIR4 IP66 ( model only) Operating Temperature -10˚C ~ 50˚C (14˚F ~ 122˚F) Boot Up Temperature 0˚C ~ 50˚C (32˚F ~ 122˚F) Operating Humidity 0% ~ 90% Power Source... - Page 10 Memo...
- Page 11 Memo...
- Page 12 Proudly distributed by Visit "http://www.hills.com.au/branches" to nd your nearest Hills o ce, or contact us at 1800 685 487 for more information.