Advertisement
Quick Links
APPLICATION
The TE56M and TF56M Thermostats provide universal replacement of single-stage, 24Vac (10 mA to 1.5A)
thermostats used in electric, gas, and oil heating and cooling systems.
These thermostats are mercury free and require no batteries.
The TE56M and TF56M use advanced proportional plus integral (P+I) control for optimum temperature
control and comfort.
Model
Mounting
TE56M
Vertical
TF56M
Horizontal
SPECIFICATIONS
ELECTRICAL RATINGS
Power Supply
Load Current Range
TEMPERATURE RATINGS
Temperature setting range
Ambient temperature range
Shipping temperature range
OPERATING RELATIVE HUMIDITY
CYCLE RATES
Cooling mode
Heating mode
System Selection
COOL-OFF-HEAT
COOL-OFF-HEAT
TE56M
Fig. 1. TE56M and TF56M Thermostats.
INSTALLATION MANUAL
Fan Selection
ON-AUTO
ON-AUTO
TF56M
24 Vac nominal, 18-30 Vac, 50/60 HZ.
10 mA – 1.5A.
40 to 99 °F (4 to 37 °C)
40 to 110 °F (4 to 43 °C)
-20 to 120 °F (-29 to 49 °C)
5 to 90% RH, non-condensing
4 Cycles per hour
6 Cycles per hour
Vtronix
TE56M, TF56M
Thermostats
Powering Method
Power Stealing
Power Stealing
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vtronix TE56M
Summary of Contents for Vtronix TE56M
- Page 1 Thermostats INSTALLATION MANUAL APPLICATION The TE56M and TF56M Thermostats provide universal replacement of single-stage, 24Vac (10 mA to 1.5A) thermostats used in electric, gas, and oil heating and cooling systems. These thermostats are mercury free and require no batteries. The TE56M and TF56M use advanced proportional plus integral (P+I) control for optimum temperature control and comfort.
- Page 2 Vtronix INSTALLATION Take out the front cover by sliding it to the right Read these instructions thoroughly before installing and remove. See Fig.3. product. Failure to follow these instructions could damage the product or cause a hazardous condition. Check the voltage and current ratings on the product to ensure that it is suitable for your application.
- Page 3 Vtronix With the cover removed, connect the wires from the heating/cooling equipment to the terminals on the thermostat base. See wiring diagram (Fig. 5) for location of thermostat terminals. Fig. 5. Connect system wires to thermostat terminals (strip 5/16 IN).
- Page 4 See Fig. 10. Heating/Cooling Equipment Status The LED on the front cover indicates the ON/OFF status of the cooling and heating equipment. See Fig.10. VTRONIX, LLC 318 Indian Trace #327, Weston, FL 33326 Copyright © 2002 Vtronix Document no. 170060-520E Rev.00...
Need help?
Do you have a question about the TE56M and is the answer not in the manual?
Questions and answers