Page 1
MANUAL ENGLISH LED Imagespot 75W Ordercode: 40713 Highlit e I nt ernat ional B.V. – Ves t as t raat 2 – 6468 EX – K erkrade – t he Net herlands...
Placing a gobo in the gobo compartment ....................8 Placing the framing shutters ........................9 Control Modes............................9 One LED Imagespot 75W (Manual mode) ....................9 Multiple LED Imagespots 75W (DMX Control) ..................9 Fixture Linking ............................10 Data Cabling ............................10 Control Panel ............................
Save the carton and all packing materials. In the event that the fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec LED Imagespot 75W ● IEC Cable 0,9m ● 4 x framing shutters ●...
Page 4
For replacement, use fuses of same type and rating only. The user is responsible for correct positioning and operating of the LED Imagespot 75W. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
Always let the installation be carried out by an aut horized dealer ! Procedure: If the LED Imagespot 75W is lowered from the ceiling or high joists, professional trussing systems can be used. Use a clamp to mount the LED Imagespot 75W, with the mounting-bracket, to the trussing system.
LED Imagespot 75W Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power plug. Always check if the right color cable is connected to the right place.
Description of the device Features The Showtec imagespot 75W is a professional LED gobo projector with DMX control. It has a zoom range from 14°-22° which is easy to set and focus with the adjustable optics. Together with the framing shutters it is possible to precisely illuminate your desired object without unwanted stray light.
LED Imagespot 75W Installation Remove all packing materials from the LED Imagespot 75W. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power suppl y before cleaning or servicing.
02) Plug the end of the electric mains power cord into a proper electric power supply socket. 03) When the LED Imagespot 75W is not connected with a DMX cable, it functions as a stand-alone device. Please see page 13 for more information about the Manual mode.
LED Imagespot 75W Multiple LED Imagespots 75W Set Up Fig. 02 Note : Link all cables before connecting electric power Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX -512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode.
LED Imagespot 75W The LED Imagespot 75W can be operated with a controller in DMX mode or without the controller in stand-alone mode. Control Panel LED display MENU button C) UP button D) DOWN button ENTER button Fig. 03 Control Mode The fixtures are individually addressed on a data-link and connected to the controller.
LED Imagespot 75W Menu Overview Main Menu Options DMX address Manual mode Display setting Temperature Reset system Reset factory settings Ordercode: 40713...
LED Imagespot 75W DMX Addressing With this menu option you can set the DMX address. 01) Press the MENU button, until the display shows 02) You can choose 512 different DMX addresses. 03) Use the UP/DOWN buttons to select the required address from Manual mode With this menu option you can choose a static color and control the settings of the color.
LED Imagespot 75W Reset factory settings With this menu option you can reset the system to its factory default settings. 01) Press the MENU button, until the display shows 02) Press the ENTER button to confirm, the display will show 03) The fixture will now start up with the original factory settings.
LED Imagespot 75W DMX Channels 4 Channels Channel 1 – Master Dimmer intensity 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Shutter/strobe (CH1 or CH4 must be set between 001-255 Closed Open 8-215 Strobe flash frequency, from slow to fast (0-20 Hz)
04) If all of the above appears to be O.K., plug the unit in again. 05) If you are unable to determine the cause of the problem, do not open the LED Imagespot 75W, as this may damage the unit and the warranty will become void.
Page 18
LED Imagespot 75W Problem Probable cause(s) Solution No power to the fixture • Check if power is switched on and One or more cables are plugged in fixtures do not function at all Primary fuse blown • Replace fuse Fixtures reset The controller is not connected.