Table of Contents
Advertisement
Features
Top Panel
2
1.
Microphone Input with Volume Control (1/4"): This mono input accepts a 1/4" (6.35mm) input such as a microphone,
guitar, or other musical instrument.
2.
Auxiliary Input: This stereo 3.5mm (1/8") input can be used to connect a CD player, MP3 player, or other audio source.
3.
Lights: Press this button to cycle through these different light effects:
• Shimmering Lights (non-reactive to music)
• EQ Bars (reactive to music)
• Wavy Line: (non-reactive to music)
• Moving Block (reactive to music)
• Pulsating Block (reactive to music)
• Pulsating Bar (reactive to music)
• Vertical Lights Wipe (non-reactive to music)
• Diagonal Lights Wipe (non-reactive to music)
• Vertical Lights Scrolling (non-reactive to music)
• Snowflake/Square Lights (non-reactive to music)
• Circular Spinning Lights (non-reactive to music)
• Off (no lights)
4.
Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to Tailgater Flash. The Bluetooth icon will
be off when in pairing mode.
5.
Master Volume Control: This adjusts the speaker's main mix volume, which includes the Microphone Input, Auxiliary
Input, Radio, and the audio of a paired Bluetooth device.
6.
Radio Selector: This button sets the radio to AM or FM or turns the radio off.
7.
Display: Displays the current radio station, battery status, and Bluetooth status.
8.
Charging Indicator: With the battery charging indicator, when the power cable is connected, movement of the top
battery segment shows the battery is charging. When fully charged, all battery segments will be lit without blinking.
When the power cable is disconnected, the battery segment shows the level of the battery.
9.
Lightning Bolt Icon: The lightning bolt icon will illuminate when the IEC power cable is connected to wall power.
10.
Decimal Icon: The decimal icon will be lit when Tailgater Flash is powered on. The decimal icon will not be lit when
Tailgater Flash is powered off.
11.
Tune/Track Buttons: Tap these buttons to tune in a radio station or go to the previous/next track on a Bluetooth-
connected device. To "seek" (jump to the next available station), hold either button down for a few seconds until it
starts to seek a station. The unit will remember the last station it was on and start at that station when powered off and
on again.
Note: When listening to Bluetooth sources, pressing the Tune/Track buttons in some apps may go to another playlist or
music genre.
12.
Bluetooth/Play/Pause: Press and hold this button for 2 seconds to disconnect a paired Bluetooth device. When
connected to a Bluetooth device, press this button to play or pause a track.
13.
USB Charging Port: Connect your device's charge cable here to charge it. USB charging only functions when the
unit's power is turned on.
Note: To charge smartphones and tablets faster, put the device's screen to sleep.
14.
Antenna: Adjust this FM antenna to get the best radio reception.
Note: To prevent accidental damage, we recommend rotating the antenna only when it is extended horizontally. Also,
retract the antenna when the radio is not in use.
15.
NFC (near-field communication): Touch and briefly hold your supported and enabled device to the NFC logo to pair the
device.
15
15
8
1
3
14
14
4
10
10
7
9
6
11
11
12
12
5
CHARGE
13
13
5
Hide quick links:
Advertisement
Table of Contents
