Personal Safety; Safety Precautions - Northern Industrial Tools PTO 540 RPM Owner's Manual

PERSONAL SAFETY

DANGER: THIS IS A HIGH-POWERED MACHINE WITH MOVING PARTS. Operate the
machine safely. Unsafe operation can create a number of hazards for you, as well as
anyone else in the nearby area.

SAFETY PRECAUTIONS

· Stay alert, watch what you are doing and use common sense when operating a chipper. Do
not use the chipper while you are tired or under the influence of drugs, alcohol, or
medication. A moment of inattentiveness may result in serious personal injury.
· Keep the decals in place and in good repair. The factory or your dealer will furnish new
decals upon request.
· Keep hair, hands, feet, and other extremities away from the hopper.
· Point the discharge chute away from doorways, sidewalks, or any areas where your view is
obstructed. The chute should be pointed downwind when possible to avoid getting dust in
your eyes, nose, and mouth.
· Safety equipment such as a dust mask, non-skid safety shoes, and a hardhat should be
used to reduce the chance of personal injuries.
· Always wear protective goggles or safety glasses with side shields while chipping
to protect your eyes from debris.
· Avoid wearing loose-fitting clothing or jewelry, which can catch on moving parts or
the material fed into the chipper hopper.
· We recommend wearing gloves while chipping. Make sure the gloves fit properly and
do not have loose cuffs or drawstrings.
· Wear shoes with non-slip treads when using your chipper. If you have safety shoes,
we recommend wearing them. Do not use the machine while barefoot or wearing
Sandals.
· Wear long pants while operating.
· Use ear protectors or earplugs rated for at least 20 db to protect your hearing.
· Do not attempt alterations, repairs, or adjustments while the chipper head is turning.
Always disconnect the PTO and stop the motor.
· Never allow people who are unfamiliar with the instructions to use the chipper. Only
individuals who are familiar with these rules should use the machine.
· Never place your hands, feet, or any part of your body in the chipper hopper, discharge
opening, or near or under any moving part while the machine is running. Keep area of
discharge clear of people, animals, buildings, glass, or anything else that will obstruct
clear discharge and/or cause injury or damage. Wind can change the discharge direction,
so be aware.
· If it becomes necessary to push material into the chipper hopper, use a small diameter
stick, not your hands.
· Keep bystanders back 100 feet from the work area at all times. Wood chips exit the chipper
at great speeds. To be safe, do not operate the machine near small children or pets, and
never allow children to operate the chipper. Disengage the PTO and stop the Tractor
engine when a child or a pet is present.
· Never pass or stand on the discharge side of the machine when the Tractor engine is
running or the flywheel is turning.
RECOMMENDED PROTECTIVE GEAR
· EyesWraparound ANSI-Approved Safety Glasses
· EarsEar-Plugs
· HandsLeather Gloves
· FeetSteel-Toed Boots
· LegsHeavy Pants
· ArmsLong-Sleeved Shirt
3 OF 13