Panasonic X70 Operating Instructions Manual page 50

Setting the maximum unit level
Use this to set the maximum cost of the calls that you can make.
Select Service Charges > Max Cost.
Select Menu > Edit.
Enter your PIN2.
Enter the maximum number of units (the corresponding cost is displayed).
Note: The duration of one unit may vary during the day at peak and off-peak times.
The call charge information may not be an accurate reflection of the tariffs
charged by your service provider.
Disabling the maximum unit level
Use this to disable your maximum cost setting.
Select Service Charges > Max Cost.
Select Menu > Disable.
Confirm that you want to disable this setting.
Enter your PIN2.
Setting a warning level
You can set a warning to indicate that you have almost reached your maximum cost.
Note: This is SIM dependent M.
Select Service Charges > Warning At.
Enter a value in units at which you want the warning to sound.
Viewing the remaining cost
You can see how many units you have left before you reach your maximum cost level.
Select Service Charges > Cost Left.
Viewing the used cost
You can see how many units you have used.
Select Service Charges > Call Meter
Settings
51