Zte SMART PTIME 7 VFD 600 User Manual page 39

Add a Wi-Fi network
You can add a Wi-Fi network if the network does not broadcast
its name (SSID), or to add a Wi-Fi network when you are out of
range.
To connect to a secured network, you first need to get the
security details from the network's administrator.
1. Touch the Home key >
2. Slide the Wi-Fi switch to the On position.
3. Touch
4. Enter the network SSID (name). If necessary, enter security
or other network configuration details.
5. Touch SAVE.
Connect to a WPS network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points which support WPS.
You can use one of the following methods to connect your
phone to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Touch the Home key >
2. Slide the Wi-Fi switch to the On position.
3. Touch
4. Press the WPS button on the access point and the access
point will recognise your phone and add it to the network.
Method two: PIN number
1. Touch the Home key >
2. Slide the Wi-Fi switch to the On position.
3. Touch
4. The WPS PIN number displays on the screen. Enter the PIN
number into the access point's setup page.
After entering the PIN number, your phone automatically finds
the access point and configures the connection.
NOTE:
For detailed information about the WPS feature of the access
point, please refer to its user documents.
> Add network.
> Advanced > WPS Push Button.
> Advanced > WPS Pin Entry.
> Settings > Wi-Fi.
> Settings > Wi-Fi.
> Settings > Wi-Fi.
39