Turning On/Off System Sounds; Adjusting Volume; Using Do Not Disturb Mode - Zte SMART PTIME 7 VFD 600 User Manual

4. Touch OK.
NOTE:
See Set a ringtone for a contact
ringtone to an individual contact.

Turning on/off system sounds

1. Touch the Home key >
notification > Other sounds.
2. Touch Dial pad tones, Screen locking sounds, Charging
sounds, Touch sounds, or Vibrate on touch.

Adjusting volume

1. Touch the Home key >
notification.
2. Drag the sliders below Media volume, Alarm volume and
Ring volume to adjust the volume for each type of audio.
NOTE:
You can adjust the media volume when a media application is in
use by pressing the Volume key. If no media application is
active, press the Volume key to adjust ringtone volume (or the
earpiece volume during a call).

Using do not disturb mode

You can limit interruptions with Do not disturb mode. This mode
silences your phone so that it doesn't make sounds or vibrate
when you don't want it to.
To turn on Do not disturb mode:
1. Swipe down from the top of the screen with two fingers to
access the Quick Settings.
2. Touch
3. Touch Total silence, Alarms only, or Priority only
depending on whether you want to allow exceptions. You
can customise the exceptions when Priority only is
selected.
(Do not disturb).
for how to assign a special
> Settings > Sound &
> Settings > Sound &
21