Send Options - Panasonic EB-SC3 Operating Instructions Manual

Messages
Setting the MMS server
MMS message server settings must be configured before using the
service. Your multimedia configuration settings may already be set
by your service provider. If settings are not available, contact your
service provider.
d Main menu > Messages > Settings > MMS > Server list
1. [192] to scroll to the required server 7 [6] (Edit)
2. [192] to edit the required item 7 [5] (Save)
3. [5] (Launch)
The following information is available for each server setting: Server
name, IP address, IP port, MMSC address, Linger time,
Connection (CSD or GPRS), CSD and GPRS.
Note: You need to configure CSD or GPRS before configuring the server
settings. See "Data connections" on page 75.

Send options

You can set the following options for outgoing MMS messages.
d Main menu > Messages > Settings > MMS > Send options
1. [192] to scroll to the required setting 7 [5] (Select)
Delivery
report
Own address
Validity period
Priority
38
Choose whether or not to receive a confirmation that your
message has been delivered.
[192] to scroll to On or Off 7 [5] (Select)
Choose whether or not to show your address to the
recipient.
[192] to scroll to Hide or Show 7 [5] (Select)
Set the period that messages are stored at the Message
centre.
[192] to scroll to 1 hour, 12 hours, 1 day, 1 week or
Maximum 7 [5] (Select)
Set the priority level for your outgoing messages.
[192] to scroll to High, Normal or Low 7 [5] (Select)