Receiving Data - Panasonic EB-SC3 Operating Instructions Manual

Applications
Receiving data via infrared
You must activate the infrared port and stay in the Idle or Main menu
display to receive data via infrared.
Activating the infrared port
d Main menu > Applications > Infrared
1. [5] (Change) to turn the infrared port on
2. [w] or [6] (Back) repeatedly to go back to the Idle or Main
menu display

Receiving data

In Idle or Main menu display:
1. When the icon (
2. A confirmation message appears when transfer is complete
3. [5] (Save)
Received Contacts cards are always stored in the Phone Contacts list.
If a received picture or sound file already exists, your phone prompts you
to rename or overwrite it.
Note: You may answer an incoming call during data transfer, but it is
advisable to connect the Personal handsfree accessory so as not to move
the phone away from the infrared beam.
The filename should include only alphanumeric letters (i.e. A-Z, a-z, or 0-9).
If the received Contacts card contains letters other than alphanumeric
letters, they may be displayed incorrectly.
To save battery power, deactivate the infrared port when not in use. The
infrared port automatically turns off in 10 minutes and the icon disappears
unless you manually deactivate it.
104
) is displayed, sender can transfer data