TASLER LTT500 Manual page 23

4. Operation concept
Rescan for devices (function key F12)
The search for new devices can take some time, depending on the number off additional attached devices. Please
wait until the status display of the device search function has closed, before executing an new function.
Advice: The search of new devices reset the already connected devices to its initial setting. To avoide the lost of
the already done settings, save those settings before the start of rescan devices.
To avoid any delay in start-up of the system, switch on first the LTT500 hardware by a short touch on the sensor
plate with LTT logo on. Wait until the initial sequence –the internal relays stop clicking- and the blue light behind
the sensor plate is shining, before starting the preAmpLTT software. This procedure avoids a second device
search from the software.
Option: The program asks, before starting a new device search, if you really want to do it. This acknowledgment
can be switched off. Go to Options – Settings and under the rider Confirmations , you can unselect confirm rescan
for devices .
Operation Manual Version 1.6 23