Title Editing - Rocktron MIDI Mate User Manual

Enter the editing mode while in any access mode by pressing the 2ND
button so that the 2ND LED lights. Now press the EDIT FUNCTION
SELECT " " button so that "Title Edit" scrolls across the display. Allow
the scrolling to finish to enter the Title Edit mode. Once the scrolling has
finished, the title of the current preset will be displayed with the decimal
point of the first character of the title flashing. The BANK (ADJUST) buttons
may now be pressed to scroll through the available characters that maybe
used in the titles. When a character is selected, the EDIT FUNCTION
SELECT " " button can be pressed to store the character in memory and
advance to the next character for editing.
All of the characters in the title mode can be edited in this fashion.
The EDIT FUNCTION SELECT buttons are used to move the cursor
(flashing decimal point) to the character position that you wish to edit.
Pressing the EDIT FUNCTION SELECT " " button will allow the user to
edit the character one place to the left of the current character. If the far left
character has been edited and editing is complete, the EDIT FUNCTION
SELECT " " button may be pressed to enter the Programmable Patch
Changes edit mode. Pressing the Edit Function Select " " button allows the
next character to the right to be edited. If the far right character has been
edited and editing is complete, the EDIT FUNCTION SELECT " " button
may be pressed to enter the MIDI Channels edit mode.
17