MIDI Mate™ Manual
12
access mode. To change preset banks, press the 2ND button so that the 2ND
L.E.D. is lit, then press the Bank " " or " " buttons to select the desired
bank. Presets are grouped in banks of 5 in the Controller Access mode.
Therefore, if you are currently in bank 55 and button 1 is pressed, preset 56
will be recalled and the L.E.D. above button 1 will be lit. Consider each
button# as a value that will be added to the current blinking bank# if pressed.
preset should be "on", then that status must be stored "on" for that
preset, and for every preset the control is desired "on".
Need help?
Do you have a question about the MIDI Mate and is the answer not in the manual?