Advertisement
5. Cut the two shipping ties from the Handrails (61.)
6. Remove the four Handrail Bracket Screws (126) from the
right side of the Frame (83.) Position the right Handrail
Bracket (42) over the four screw holes in the Frame.
Loosely thread two of the Screws into the back holes of
the Bracket and into the Frame as shown.
Repeat this step on the left side of the Frame (83.)
7. Locate the section HOW TO FOLD THE TREADMILL
FOR STORAGE on page 10. Follow the instructions to
fold the treadmill.
Thread two more Handrail Bracket Screws (126) into the
right Handrail Bracket (42) and Frame (83.) Firmly
tighten all four Screws in the Bracket. Thread two more
Screws into the left Handrail Bracket and Frame (not
shown.) Firmly tighten all four Screws in the Bracket.
8. Remove the backing from the Adhesive Clip (90.) Press
the Clip onto the Base (86) in the indicated location.
Press the Allen Wrench (89) into the Clip.
9. Make sure that all parts are tightened before you use the
treadmill.
Note: To protect the floor or carpet, place a mat under the treadmill. For information on ordering a mat,
see REPLACEMENT PARTS on the back cover.
6
5
Shipping
Ties
61
6
126
42
83
7
42
126
83
8
86
90
89
2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the storage latch
closes over the frame guide. Make sure that the storage
latch closes fully over the frame guide.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the storage
position in temperatures above 85° Fahrenheit (35
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the stor-
age latch is closed fully over the frame guide.
1. Hold the upper ends of the treadmill. Place one foot on
the base as shown.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back, or the base
pads may come off. To reduce the risk of injury, use
extreme caution while moving the treadmill. Do not at-
tempt to move the treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the tread-
mill until it is resting in the storage position.
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the treadmill with your right hand as
shown. Using your left thumb, slide open the storage latch
and hold it open. Pivot the treadmill until the frame is past
the storage latch.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. Caution: To avoid pinching your
hands, do not hold the treadmill in the locations indi-
cated by the arrows. To decrease the possibility of in-
jury, bend your legs and keep your back straight.
Storage
Latch
Closed
o
C.)
Frame
Guide
Base
Front Wheel
Storage
Latch
Opened
Do not hold here
11
Advertisement
